X670E Taichi Unable to find BIOS Image

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   You need to plug in the usb into the flashback port. I learned that the hard way. It is marked by an outline around the port just like the flashback button.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Stampede89 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 28 Jul 2023 Status: Offline Points: 15	Post Options Post Reply Quote Stampede89 Report Post Thanks(0) Quote Reply Topic: X670E Taichi Unable to find BIOS Image Posted: 28 Jul 2023 at 3:36am
	You need to plug in the usb into the flashback port. I learned that the hard way. It is marked by an outline around the port just like the flashback button.

M440 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 12 Jul 2023 Status: Offline Points: 3145	Post Options Post Reply Quote M440 Report Post Thanks(0) Quote Reply Posted: 28 Jul 2023 at 2:21am
	my b650m-hdv/m.2 would not detect bios on a certain drive when I used "flashback" option, if you are certain the board worked with this perdrive, than it should work, but trying other would be good. also - You downloaded and uncompressed the correct bios image to the drive?
	asrock b650m/hdv.m2, ryzen 7700x@85watt

Gridsquare Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 27 Jul 2023 Location: USA Status: Offline Points: 20	Post Options Post Reply Quote Gridsquare Report Post Thanks(0) Quote Reply Posted: 27 Jul 2023 at 11:50pm
	I purchased my mobo about 3 months ago and need to update the bios, as I've heard there are some decent AMD improvements. I've had nothing but ASUS boards my entire life, so this was my first time dealing with ASRock. Seems to be pretty simple to download the bios and extract it onto a FAT32 USB, right? Every time I restart and try to EZFLASH, it can't find any image. I've tried using other USB ports, nothing is working. I've done all the tutorials on formatting the USB properly in disk partition and all that. It's a USB3.0 drive, as all my ports are USB 3. I have read some places say you need a USB2, but that seems highly outdated. I need to know what to do...I swear when I bought the thing, I updated the bios with the same USB stick when I boot tested to train the ram and all that. Any ideas?