H97M Pro4 and USB hub

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Thank you for the reply. I thought that might be the case. I will look into purchasing a better quality USB hub.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
jonk999 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05 Jul 2015 Status: Offline Points: 6	Post Options Post Reply Quote jonk999 Report Post Thanks(0) Quote Reply Topic: H97M Pro4 and USB hub Posted: 06 Jul 2015 at 3:23pm
	Thank you for the reply. I thought that might be the case. I will look into purchasing a better quality USB hub.

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24653	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 05 Jul 2015 at 3:48pm
	Many sub standard/budget or older powered USB hubs suffer from power leakage that can travel up the USB cable to the motherboard. Some motherboards have less protection (particularly older ones) and work fine. However, newer boards, particularly UEFI boards, seem to not like this. The power leakage is minimal in most cases and usually not enough to damage anything but with better power/surge protection it can often be enough to prevent power up. I suspect your hub is either old or an off brand with poor power circuitry. There seem to be 2 schools of thought on the matter: 1. USB voltage protection kicks in preventing boot 2. The power leak up the cable causes chaos with the UEFI I suppose either could be true but the root of the problem is common, power leaking up the cable to the PC. Generally in such scenarios its best to get a new, decent brand hub. Welcome to the forums Edited by Xaltar - 05 Jul 2015 at 3:49pm

jonk999 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05 Jul 2015 Status: Offline Points: 6	Post Options Post Reply Quote jonk999 Report Post Thanks(0) Quote Reply Posted: 05 Jul 2015 at 3:09pm
	I just purchased the H97M Pro4 as part of a new PC build - i5 4600, 16GB RAM, 2x 250GB SSD. I also have a powered 10 port USB hub which worked fine on my previous PC. If I have the hub plugged into the new one, the PC doesn't power up when I press the power button. If I unplug the hub from the USB port on the motherboard or disconnect the USB hub power source it powers up fine. I have tried both the USB2 and USB3 ports on the motherboard with the same result. Is there some incompatibility between the motherboard and powered USB hubs? Or is there perhaps a setting in the bios I have missed?