Asrock 550m-c dram cpu lights no display

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Reset the CMOS. Try rebooting into the BIOS with only one stick of RAM at a time and see if it will get into the BIOS so that you can set the options properly. Default settings by the way will not usually work as things like Secure Boot and CSM are not set properly

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
johnukguy Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 07 Jun 2024 Location: USA Status: Offline Points: 120	Post Options Post Reply Quote johnukguy Report Post Thanks(0) Quote Reply Topic: Asrock 550m-c dram cpu lights no display Posted: 07 Jun 2024 at 7:06am
	Reset the CMOS. Try rebooting into the BIOS with only one stick of RAM at a time and see if it will get into the BIOS so that you can set the options properly. Default settings by the way will not usually work as things like Secure Boot and CSM are not set properly

JodyyHiiiRolla Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 04 Jun 2024 Location: US Status: Offline Points: 20	Post Options Post Reply Quote JodyyHiiiRolla Report Post Thanks(0) Quote Reply Posted: 04 Jun 2024 at 3:55am
	I?�ll start with system specs. Asrock 550m-c, 4070 GPU, Ryzen 5 5700, 64 gb ram 3600 mhz. Some context to my problem. Ive had this build for 2 years, no issues. Last week i shut my system down as i normally do, however when i went to then it back on it wouldn't boot. No power anywhere. The only way i was able to get it to turn on finally was but unplugging the CMOS battery and only then was i able to get it to turn back on. Only thing is when it turns on i get the dram and cpu lights staying lit and i get no display. I know my ram speed is technically only compatible via overclocking but i had installed the ram over a year ago and had no issues. If anyone can point me in the direction to figure this out i would greatly appreciate it. Thank you in advance