Red Flashing Light and Motherboard turns off

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Dear compound0321,

Greetings, this is ASRock TSD.

The Dr.Debug code 3F indicates the system is stuck at memory training process. (between code 01-54)
Please refer to user manual page33 about Dr. Debug detailed information.
http://asrock.pc.cdn.bitgravity.com/Manual/Fatal1ty%20X370%20Professional%20Gaming.pdf

Regarding this case, we provide some suggestions for you to verify:

1. Please refer to user manual page.26 to clear CMOS to verify. (Please shut down the AC power in advance)
2. Only install one stick memory to each DRAM slot by turns to verify.
3. If possible, please install other memory modules to verify.

Thanks!

All the best,
ASRock TSD

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Topic: Red Flashing Light and Motherboard turns off Posted: 14 Jul 2017 at 3:28pm
	Dear compound0321, Greetings, this is ASRock TSD. The Dr.Debug code 3F indicates the system is stuck at memory training process. (between code 01-54) Please refer to user manual page33 about Dr. Debug detailed information. http://asrock.pc.cdn.bitgravity.com/Manual/Fatal1ty%20X370%20Professional%20Gaming.pdf Regarding this case, we provide some suggestions for you to verify: 1. Please refer to user manual page.26 to clear CMOS to verify. (Please shut down the AC power in advance) 2. Only install one stick memory to each DRAM slot by turns to verify. 3. If possible, please install other memory modules to verify. Thanks! All the best, ASRock TSD

compound0321 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 25 Jun 2017 Status: Offline Points: 3	Post Options Post Reply Quote compound0321 Report Post Thanks(0) Quote Reply Posted: 14 Jul 2017 at 2:34pm
	I have just purchased and built the X370 Professional Gaming with1800X and HyperX DDR4 3000 Mhz 2x8GB in Slots 2 and 4. The issue is that the light simply flash red on the motherboard then the system will power off a few seconds and then restart again to again flash red. I hooked it up to a HDMI port on the GIGABYTE 1080 graphics card but there is no display output when powered on. The flashing red light continually does this for 30 seconds then seems to power up. On the motheboard it comes up with a code 3F however I could not find anything about it in the manually. Can you shed some light what causing this, it not the motherboard as I replaced this same model recently and had the same error before, so it some other component. The only other component I ruled out is the Power supply. If you can advice what could potentially be causing this. I can provide more information if required.