Ryzen RAM OC issue

LegacyCore wrote: I do have the latest BIOS version, all the latest driver versions, up to date on Windows 10 Pro x64 and everything else I can think of.  I feel I should be able to run my memory at the advertised 3200MHz, especially for memory that's on the mobo's QVL!

The problem with that speed of 3200 MHz is that it's an overclock and as it's stated in the memory QVL:

"Note3: The O.C. mode is not guaranteed. It depends on whole system configuration and other parameters."

So, it's always a bit of a gamble, unfortunately. Apart from the SOC voltage you mentioned, the reason you're not reaching 3200 MHz may, for example, be because of the RAM modules themselves being of lower quality or because of the overclock you have on the CPU. Pushing the system towards it limits can sometimes become a balancing act, where you may need to dial some parameters down in order to increase others. You could try setting your CPU to 3.9 GHz or 3.8 GHz and see if that helps with the memory speed.

There's also a program that you can use to find better settings for your RAM modules (http://www.overclock.net/t/1640919/ryzen-dram-calculator-overclocking-dram). That could be worth a try. I've no personal experience on using it, but hopefully some of the more knowledgeable members chime in. If not, you can search the forum for RAM speed related threads and you should find some discussion on using the program.


Edited by PetrolHead - 22 Dec 2017 at 6:11pm

Hello, so I feel I'm having an issue that I should not be having with a new rig I built a few days ago.  I'm not new to OCing a PC but I am new to Ryzen setups.  Specs of build are in my sig, so here's the issue.  I currently have my Rzyen  1200 overclocked to 4.0GHz stable with idle temps at 38C and Prime95 temps at 51C.  Well below the temp threshold from my understanding (thank you Corsair H60).  I'm unable to get to 4.1 without instant failure, but I hear most can't so I'm very happy at 4.0GHz.