Adding M.2 Drive & SATA HDD with X99E-ITX/AC

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Update:I have installed both of the new drives and have them working now.  I didn't have to do anything in the UEFI, the original Samsung SSD remained as the only boot device.

I had to restart once before the 2TB drive appeared in Windows.  The M.2 drive showed in Device Manager but not as a drive I could use.  I had to go to Disk Management and choose either MBR or GPT as a partition type on the M.2 drive.  After doing that I could format it NTFS and choose a drive letter for it.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Jon Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 26 Apr 2015 Location: USA Status: Offline Points: 142	Post Options Post Reply Quote Jon Report Post Thanks(0) Quote Reply Topic: Adding M.2 Drive & SATA HDD with X99E-ITX/AC Posted: 17 Feb 2018 at 10:47am
	Update: I have installed both of the new drives and have them working now. I didn't have to do anything in the UEFI, the original Samsung SSD remained as the only boot device. I had to restart once before the 2TB drive appeared in Windows. The M.2 drive showed in Device Manager but not as a drive I could use. I had to go to Disk Management and choose either MBR or GPT as a partition type on the M.2 drive. After doing that I could format it NTFS and choose a drive letter for it.
	ASRock X99E-ITX/ac \| Intel i7-5820K \| ASUS GTX 970 mini \| Samsung 850 EVO 250GB \| Crucial Ballistix (2x8GB) \| Corsair CX600M \| CoolerMaster Seidon 120V \| CoolerMaster Elite 110 \| Windows 10 64-bit

Jon Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 26 Apr 2015 Location: USA Status: Offline Points: 142	Post Options Post Reply Quote Jon Report Post Thanks(0) Quote Reply Posted: 17 Feb 2018 at 6:21am
	I have the X99E-ITX/AC motherboard running Windows 10 on a Samsung 850 EVO 2.5" SSD. I just bought an M.2 SSD (Crucial/Micron M500 480GB, MTFDDAV480MAV) and a 2TB 3.5" HDD for backup. I don't see this SSD listed on the supported storage list: https://www.asrock.com/MB/Intel/X99E-ITXac/index.asp#Storage Can I just plug these in and use them as secondary/tertiary drives or is there any UEFI setup I have to do? I don't really want to migrate my OS off of my current drive, I just want these for added capacity. Thanks!
	ASRock X99E-ITX/ac \| Intel i7-5820K \| ASUS GTX 970 mini \| Samsung 850 EVO 250GB \| Crucial Ballistix (2x8GB) \| Corsair CX600M \| CoolerMaster Seidon 120V \| CoolerMaster Elite 110 \| Windows 10 64-bit