Adding RAM to existing kit on an x370 taichi

Seeing as the QVL is mostly about an earlier AGESA, and thing improve all the time, I'd say even non-identical DIMMs should be fine.  Really I'd stick to 2x of the same time to add on later, rather than a hickle-de-pickle-de odd DIMM here/there thing.

I don't expect much more than 2400MHz out of the system though.  Most folks who push the RAM speed and aim for more performance from the Infinity-Fabric aren't running huge amounts of RAM.


One question to ask yourself is that would Quad Channel memory work better for you?  It seems the Threadripper series support quad channel RAM.


The RGB crap can be turned off.  I doubt you'll find a board without it.  The glass-side-panel case brigade want pretty colours.  Rest assured the x370 TaiChi is one of the crappiest RGB lighting boards around for the price, if you don't care, like myself, all good.

The only other board that I would entertain for a stable, strong and well built system is the ASUS Crosshair VI (also known as CH6), but the ASRock TaiChi offered more SATA, and a lot less stupid disable-function ASMedia chips which won for me.

How is the second-hand/used market for DIMMS where you are?  You could buy MoBo and CPU now and some lonely 8GB DIMM now or such and sell on later, to put in a lot more RAM.

I'm only 33, and I share similar desired.  No frills, solid and reliable performance, stability.  I couldn't give much of a hoot if they'd not even painted the PCB and left it green like in the good/bad old days of computing.  It goes in a case, with the side on.  I don't look at the expensive stuff I bought.  I just want it to work....and for some daft reason I stuck with Windows....

All the best with your choices and purchases


Edit: I had an old Amiga 1200AGA, with 2MB of RAM and a 68020 CPU.  I added an 16MB + 68030 40MHz CPU expansion board, and things were real dandy.  Couple dot a 256MB HDD, I never ran outm of resources.

Come to today and I have more ram than my old Amiga could dream of in HDD space!  It's laughable.  Look at smart phones and such.

Give it a few more years and more people will begin to question whether we are really living beings in a real sense, or actually a simulation of a past real universe, and we are only slowly getting to the point where we simulate our species and loop it all over again....now that stuff will make people go insane!

Well if that's the case then if I look at one of the entries as an example:

DDR4  HyperX  2400  16GB  HX424C12PB3K2/32   Hynix M-die  DS  2/4

... you know from the size (16GB) and the module  # ending in 32 that it's a 32GB kit, confirmed by checking it out on Newegg.ca. So that particular entry is 2 x 16GB for 32GB total, and if what you're speculating on the 2/4 is true, then in order to check out 4 sticks they'd have to have doubled up the kit. You follow my logic?

And that's just one entry. There are several entries that follow that pattern of being 2 x 16GB total 32GB KITs that have the 2/4 DIMM Socket Support designation.

datonyb wrote: what i do know is you have less chance of higher speeds with all 4 sticks than with two what i also know is the qvl is quite outdated in respect to the ability to run the ram better e.g. the bios are better now than they were and ram problems are less frequent the taichi has always also been one of the better boards to support ram smoothly with am4

For the moment I'm just trying to establish whether or not I can do what I'm hoping to do. If board stability has gotten better it would certainly bode well for doubling up a kit.

datonyb wrote: from launch i have run non qvl ram and i run it overclocked im guessing your more concerned with ram size than speeds though

For me the priorities in order of importance right now would be:

- ability to double up a 32GB kit to make 64GB (so that I could make it in two purchases)

- related to that is price. I'm trying to stay under $500 CAD for a 32 GB kit which if you know current Canadian RAM prices you'll know is a challenge. After 11% tax pushes a $500 purchase to mid $500 CAD. However there are kits to be found in the $430 to $500 CAD range. 

- Compatibility, related to the above parameters

- And yes the priority is capacity

- Speed & CL are bonuses, but not the priority

- Lastly, RGB. Id' prefer ti didn't have it.

Worst case scenario I buy the CPU and the mobo on sale now, and wait another six weeks until I can save $1100 + for a 64GB kit. I do have a current rig

EDIT: I'm a mid 50's yo editor, had rigs since the mid 80's I didn't think I'd see the day when I'd say 64GB RAM kit and $1100 in the same sentence. My current 4 x 8GB - 32GB DDR3 kit was ~ $250 CAD 

Any advice appreciated.

Thank you