[FIXED] X370 Fatality K4 DRAM Voltage on >=4.7

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi everyone,
UPDATE:
In order to get the DRAM voltage setting to work, you have to update (I'm not kidding) the Asus RGB LED software (minimum v 1.0.36) and let it do a firmware update. After that DRAM voltage adjustments are persistent again.

____________________________________________

In the past I've read that since BIOS version 4.5 the DRAM voltage adjustment is apparently broken on the X370 K4.

I've also heard that applying custom DRAM timings don't work if you use AMD CBS to set P-State 0.
I'd like to update, but I would need at least DRAM voltage adjustment to be working, since my kit defaults to 1.2V, has no XMP profiles and needs 1.35 to run at 2933 stable.

Anyone here with that board who could confirm whether this is still the case on version 4.7?

Thank you,
Spiritreader

Edited by Spiritreader - 18 Jul 2018 at 7:03pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Spiritreader Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Jul 2017 Location: Germany Status: Offline Points: 11	Post Options Post Reply Quote Spiritreader Report Post Thanks(0) Quote Reply Topic: [FIXED] X370 Fatality K4 DRAM Voltage on >=4.7 Posted: 29 Jun 2018 at 7:31am
	Hi everyone, UPDATE: In order to get the DRAM voltage setting to work, you have to update (I'm not kidding) the Asus RGB LED software (minimum v 1.0.36) and let it do a firmware update. After that DRAM voltage adjustments are persistent again. ____________________________________________ In the past I've read that since BIOS version 4.5 the DRAM voltage adjustment is apparently broken on the X370 K4. I've also heard that applying custom DRAM timings don't work if you use AMD CBS to set P-State 0. I'd like to update, but I would need at least DRAM voltage adjustment to be working, since my kit defaults to 1.2V, has no XMP profiles and needs 1.35 to run at 2933 stable. Anyone here with that board who could confirm whether this is still the case on version 4.7? Thank you, Spiritreader Edited by Spiritreader - 18 Jul 2018 at 7:03pm