Asrock X399 + Watercooling question

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi thanks for your reply, im away at the mo but back sat so will have a look and see what hwinfo says, my boards a x399 taichi .

thanks

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Redbull2k7 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 Jul 2018 Location: WALES Status: Offline Points: 4	Post Options Post Reply Quote Redbull2k7 Report Post Thanks(0) Quote Reply Topic: Asrock X399 + Watercooling question Posted: 20 Jul 2018 at 8:23am
	Hi thanks for your reply, im away at the mo but back sat so will have a look and see what hwinfo says, my boards a x399 taichi . thanks

XmanSE Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 Jul 2018 Location: Madrid Status: Offline Points: 51	Post Options Post Reply Quote XmanSE Report Post Thanks(0) Quote Reply Posted: 19 Jul 2018 at 9:07am
	70c is really high, is the tcrtl or tdie temp, tdie temp is real temp, try hwinfo and check again. I have the cm240 too, but i have a taichi, you need to adjust the fan curve in atunning, because the cm240 don´t have any control software for the pump and the fans, and in the bios in WH monitor set the settings to silence or standard mode for the cpu fan 1 (radiator fans), and the pump change setting to pump and run at full speed. The fans at max speed are extremely noisy
	X470 Taichi \| Ryzen 9 3900X \| 8x2 GSkill Trident Z RGB \| Asus Strix RTX 2080ti \| Samsung 970 Evo+ \| EVGA 750 GQ

Redbull2k7 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 Jul 2018 Location: WALES Status: Offline Points: 4	Post Options Post Reply Quote Redbull2k7 Report Post Thanks(0) Quote Reply Posted: 18 Jul 2018 at 7:28pm
	Hi, im new to all this so might just be me , but i just had a coolermaster cm 240 water cooling system fitted to my machine, when its running the fans on the radiator run flat out ? on further inspectionthis is how its all connected up waterpump - no31 connector cp fan/water pump fan connector (cpu_opt/w_pump) radiator fans -no8 cpu fan connector (cpu_fan1) rear fan - no32 chassis fan connector (cha_fan1) empty - no01 chassisfan/waterpump connector (cha_fsn3/w_pump) My question is should the fans run flat out ? the rear fan runs slow and should the fans be connected to the no01 connector or doesnt it matter ? and do i need to just go into the bios and configure the fans ? also when i run the hw software and see the temps it reads in the 70s yet when using cpuz hw monitor it was 38c ? really confused by all this lol pc system is threadripper overclocked to 3800 thanks