|
970m pro3 annoying me (Ram reserved, boot probs) |
Post Reply 
|
Page 12> |
| Author | |
gizmic 
Groupie 
Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: 970m pro3 annoying me (Ram reserved, boot probs)Posted: 10 Aug 2018 at 12:45pm |
|
hehe datonyb
i said support out of the box with fx series cpu installed that ram ratio will be visible i didn't say it would be possible to run :D my kits are mem kits are 2200 but will not run over 2004mhz no matter the timing
OP could it be that the motherboard ram slot doesn't work which is causing the problem try to boot with 1 stick and try each slot. |
|
|
|
 |
|
|
datonyb
Senior Member 
Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3154 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 Aug 2018 at 1:16am |
|
everyones milage will vary the op asked a question i gave the answer the fact is nothing is ever going to be 100% between cpu/board and ram the fact you got 2000mhz on a phenom is great i have a system here that wont go to 1866 with 1866 ram and its not a low end board or psu either (m5a97 pro) and i very much doubt it would work out the box with an fx cpu at 2400 the fact is the op ALREADY is struggling with much lower speeds with his personal hardware and his ability to tweak things if he has lower end ram than the job is much harder for example im running my ryzen at 3466 cl 14/14/14/14 that dosnt mean everyone can be running ryzen systems at that speed and low timings i got lucky A LOT OF OTHER SYSTEMS THE SAME ARE NOT
|
|
|
[url=https://valid.x86.fr/jpg250]
 [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
|
|
|
gizmic
Groupie
Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Aug 2018 at 10:44am |
|
2000mhz isn't hard on phenoms pretty standard actually with 8XX series up motherboards heck was even doing 300 fsb with the 790FX days
970M pro3 will support 2400 ram out of the box with fx cpus |
|
|
|
|
|
|
|
PetrolHead
Groupie
Joined: 07 Oct 2015 Status: Offline Points: 403 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Aug 2018 at 6:41am |
|
The Phenom II's only officially supported speeds up to 1333 MHz so getting 2000 MHz is quite lucky. Not that those speeds would even be an option on the 970M Pro3, which only let me choose speeds up to 1600 MHz back when I had my 1090T BE... In any case, the FX CPUs officially support speeds of 1866 MHz with only two sticks and two memory slots on the motherboard. Add two empty slots and the officially supported speed drops to 1600 MHz. Use four sticks of dual rank (or mixed rank) RAM and the officially supported speed drops to 1333 MHz. If those 4 sticks of 4 GB RAM are dual rank, anything above 1333 MHz will be an overclock and while it's entirely possible to reach higher speeds, it may require additional tweaking in the BIOS. If they're single rank, then 1600 MHz should be doable just by selecting that speed in the BIOS, even if the system defaulted to 1333 MHz - assuming the memory you have is all from the same kit and is listed in the 970M Pro3's memory QVL.
Edited by PetrolHead - 08 Aug 2018 at 6:41am |
|
|
Ryzen 5 1500X, ASRock AB350M Pro4, 2x8 GB G.Skill Trident Z 3466CL16, Sapphire Pulse RX Vega56 8G HBM2, Corsair RM550x, Samsung 960 EVO SSD (NVMe) 250GB, Samsung 850 EVO SSD 500 GB, Windows 10 64-bit
|
|
|
|
|
gizmic
Groupie
Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Aug 2018 at 10:11am |
|
ran 1055T @ 2000 fx should go higher
|
|
|
|
|
|
|
|
datonyb
Senior Member
Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3154 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Aug 2018 at 1:11am |
|
fx cpus dont always support top end ram speed eg 2 sticks of 1600 may work fine ,even 2 sticks of 1866 4 sticks puts more strain on the controller so hence why im guessing its down clocked them to 1333 the difference between 1333/1600 is probably never going to show in games ,BUT if you can tighten up the timings of the ram then that may very well show increased frames now size of ram .....................forget wasting your money on 32 gb unless you do content creation etc for gaming theres just no reason to go with 32gb on an fx cpu platform....or any other really lastly it has to be said if you have bought a new motherboard/new cpu/ and plan new ram why on earth didnt you move to am4 platform and ryzen, its insanely more effective than the outgoing fx am3 platform mate
|
|
|
[url=https://valid.x86.fr/jpg250]
[/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
|
|
|
Restlesspolymath
Newbie 
Joined: 24 Jul 2018 Location: London Status: Offline Points: 9 |
Post Options
Thanks(0)
Quote Reply
Posted: 06 Aug 2018 at 11:13am |
|
Oh just to let you know thought I would update you.
So I contacted Ccl and you was right they replaced my Mobo they confirmed it was faulty. I also just got a captain 240 ex cooler and a fx 8350 and I gotta say I?™m pretty happy right now. The cooler is keeping my cpu temp super low around 24c idle and 43 while playing games. My ram issue is gone also. Getting the full amount although it seems like it?™s giving meb1333hz speed although my ram is 1600 hz. Possibly cos I have two versions of the same ram. I purchased a second hand set of two 4gb rams so I could extend my ram to 16gb until I can get something nice like the hyper X. Will probably get 32gb sometime around Black Friday. I was thinking of getting a new gpu but I don?™t think The sapphire rx470 nitro is that bad for now. Seen quite a bit of improvement from my previous set up that had less ram and useless cooling. |
|
|
|
|
datonyb
Senior Member
Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3154 |
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jul 2018 at 4:09am |
|
arh if you onl;y had it a day contact cclonline the distance seller regs have you covered for a return as for asrock i havnt had to look myself but im sure theres a uk based support centre as i said though uk based buyers are covered by the distance seller regs you dont even have to give a reason for return.................. i use cclonline for items myself at times im quite satisfied with them to be honest as i am with overclockers/amazon/btshop/novatech/scan it depends who has the best price on the day inc. postage
|
|
|
[url=https://valid.x86.fr/jpg250]
[/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
|
|
|
Restlesspolymath
Newbie
Joined: 24 Jul 2018 Location: London Status: Offline Points: 9 |
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jul 2018 at 3:48am |
|
Haha that?™s funny cos I?™m from North London. I actually changed the ram to 1333 hz to get the three dims working. I also did the flash update in windows before I reset the pc with no trouble so was so annoying when it crashed cos I only just had it working kinda properly. I was reading that the Ram might of been reserved for my gpu but didn?™t know why that would be the case since I didn?™t set it like that and didn?™t see any settingsi like that.
I copied the same first message and wrote to customer service when I did this forum but here?™s something I don?™t get. The Rma support is only for America and asking me for an American address? There is no number to call. I got this from cclonline (will be the last time I do that btw) and I literally just missed the closing time to call them after trying to get it to work all day. I only have had it a day so far. I?™m sure it?™s stupid DPD that flung the board around or something cos from the start it?™s been a pain in the ass. Something was dodgy was before the bios flash. Anyways knowing my luck or should I say lack of it there will be either some lengthy bull I have to wait to get sorted or they won?™t help or replace it then charge me for posting it etc on top of that. Might even try get a refund considering I wanted to get a fx8350 in a week or two and this grannyboard can?™t even handle a fx 6350 and 4 Ram sticks. Damm wtf |
|
|
|
|
datonyb
Senior Member
Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3154 |
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jul 2018 at 2:50am |
|
ok well i agree ALL brands should NOT give a windows option to flash but all do and all are a disaster waiting to happen also when flashing bios i tend to advise removing all bios tweaks eg turn of overclocking and xmp on ram AND only use 1 stick of ram , all of these things have more chance of a data corruption even in bios based flasher as for the ram issue a fx cpu and 4 sticks of ram is pushing the ability of the cpu's memory controller especially at 1600mhz in some cases you have to run it at 1333mhz or loosen up the timings a little remember the advertised xmp speed is for an intel system ............... anyways .......alas it seems your option now is to open a support ticket to get a rma number and return to asrock im more than happy to help you set up your hardware when its all back (eg bios settings etc) in fact if your south london bring a small box of becks round and i'll do it for you
 |
|
|
[url=https://valid.x86.fr/jpg250]
[/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
|
|
|
Post Reply
|
Page 12> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options