|
z370 extreme4 |
Post Reply 
|
Page 12> |
| Author | |
Abiak 
Newbie 
Joined: 13 Sep 2018 Status: Offline Points: 52 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: z370 extreme4Posted: 27 Oct 2018 at 10:31pm |
|
The power cable of the CPU was different from the mobo https://imgur.com/a/SWYOuoG#Y7CnVN3 I wonder if this can cause problems.
And about the GPU, what's better 2 power cables or just one cable splitter? Edit: I managed to fix most of the lag, it was caused by Corsair service, however rarely there are still some little lags and Edge's icon is still white. May I know which drivers are need for gaming: realtek, INF and stop? The next time I will avoid to install the others. Edit2: well now I have lag in firefox menus and windows folders, it's not caused by any service. Edit3: I was wondering if this motherboard supports virtual surround.
Edited by Abiak - 28 Oct 2018 at 9:01pm |
|
 |
|
|
Abiak
Newbie
Joined: 13 Sep 2018 Status: Offline Points: 52 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 Oct 2018 at 1:54am |
|
OS = Windows 10 Home 64-bit
MOBO = z370 Extreme4 CPU = Intel i7-8700k 3.7Ghz turbo 4.7GHz RAM = 2x8GB G.Skill Trident Z DDR4 XMP 3200MHz VGA = Zotac GeForce GTX 1080 Ti Amp Extreme Core Edition 11GB VRAM Cooling = DeepCool Captain 240EX AIO PSU = Seasonic 24141 750W UPS = PowerWalker VI 1000 PSW IEC 1000VA 700W SSD = Samsung MZ-V7E500BW 970 EVO 500GB M.2 NVMe HDD = Seagate ST1000DM010 1TB Monitor = Dell S2417DG 144Hz If we can't find the solution then I'll buy jumpers. Ah I forgot to say, when it lags there are audio problems too.
Edited by Abiak - 27 Oct 2018 at 1:58am |
|
|
|
|
Xaltar
Moderator Group 
Joined: 16 May 2015 Location: Europe Status: Offline Points: 25073 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 Oct 2018 at 12:10am |
|
As for your issue with lag, please provide your full system specs so we know what you are working with:
CPU: RAM: (model number, brand and capacity) PSU: Storage: M.2/SSD: |
|
|
|
|
|
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 25073 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 Oct 2018 at 12:08am |
|
As I said, none of those drivers are essential and by what you are describing I doubt they will help with your issue.
IRST is intel's own driver and management system for storage, it can, in some circumstances be more reliable but it won't make a difference to your problem. IME is not really meant for home users, I personally use it but for work applications. If you don't know what it is or what it does you can google it but again, it won't help with your issues. Jumpers are sold in large quantities because they are easily lost, you can use them over and over, in fact I still have a few from the 80's in my toolbox.
|
|
|
|
|
|
|
|
Abiak
Newbie
Joined: 13 Sep 2018 Status: Offline Points: 52 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 Oct 2018 at 10:49pm |
|
Thank you. 3) Intel Rapid Storage = I don't need RAID nor cache, however it has Link power management and I wonder if my HDD needs it. Lan = Can I have an example of what it does? IME = Does it increase CPU performance or what? 4) I asked because since when I reinstalled windows 10 I started to have lag problems. Mostly when I use Mozilla Firefox with hardware acceleration and 144Hz refresh rate, with higher or lower refresh rate there is almost no lag. Also I have lag in some apps, like windows settings and realtek audio console then some icons became white too (Restart to UEFI, Microsoft Edge, Core Temp). I tried everything: reinstall drivers, update bios, reinstall windows IN PLACE and clean, I removed the CMOS battery for 10 minutes too, but I did not fix the lag. I wonder if I should try with a jumper, I saw on amazon they sell many together which is why I wonder if they work only once. If you think I should try with a jumper could you link me one?
Edited by Abiak - 26 Oct 2018 at 10:50pm |
|
|
|
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 25073 |
Post Options
Thanks(1)
Quote Reply
Posted: 26 Oct 2018 at 10:02pm |
|
Hello Abiak, I am not ASRock Tech Support but I can answer some of your questions for you:
1. The ASMedia ports are provided by the ASMedia controller chip on the board and therefore are slower than the ones provided by the intel chipset. 3rd party controller chips are almost always slower than anything integrated onto the chipset. 2. The only time it makes a difference which PCIe x1 slot you use is when one of the slots has shared resources with another device (sometimes the case with M.2 slots on some boards). If it works in either then it will perform identically no matter which one is used. 3. They are not strictly needed for the system to function but I tend to prefer to install at least the IRST and IME drivers. The LAN drivers are only useful if you want more control over your LAN functionality, most users don't need this and are fine with the default windows driver. 4. Replace, in my clear CMOS post simply means put back in, not replace with a new one. You can however buy new batteries from just about any electronics store, just make a note of the number code on the battery, you can even take it (the battery) to the store with you and have them give you the right replacement. This is only really useful if your system is losing it's settings when removed from power (signifying a dead battery). I hope this answers your questions
 |
|
|
|
|
|
|
|
Abiak
Newbie
Joined: 13 Sep 2018 Status: Offline Points: 52 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 Oct 2018 at 9:21pm |
|
Thank you for your answer, I asked because in the manual there is written that SATA 3_0 has faster boot, I guess I assembled them at their best. I've few other questions: 1 What's the difference between ASMedia ports and SATA? 2 Are PCIe1 and PCIe5 the same? I'm using the wi-fi adapter in PCIe5. 3 Are the drivers Intel Rapid Storage Technology, Intel Lan and Intel Management Engine needed? 4 I thought that removing the CMOS battery for 10 minutes was enough to reset the BIOS but then I've read http://forum.asrock.com/forum_posts.asp?TID=630&title=how-to-clear-cmos-via-battery-removal in my mobo there was no jumper and also I don't get if I need to buy a new battery (the "replace" battery sentence), if yes could you link me a website where I can buy a jumper and/or a battery? Also I don't get if jumpers can be used only once.
|
|
|
|
|
ASRock_TSD
ASRock_Official 
Joined: 20 Mar 2015 Status: Offline Points: 8787 |
Post Options
Thanks(1)
Quote Reply
Posted: 26 Oct 2018 at 10:30am |
|
|
|
Abiak
Newbie
Joined: 13 Sep 2018 Status: Offline Points: 52 |
Post Options
Thanks(0)
Quote Reply
Posted: 23 Oct 2018 at 6:34pm |
|
I know what it supports, I already own it. I'm using: SSD with OS = M2_2 HDD = SATA 3_0 1) I was wondering if M2_1 is faster than M2_2, if I should use M2_1 instead of M2_2. 2) Since M2_1 disables SATA 3_0 I was wondering if I should switch the HDD to SATA 3_2. 3) I don't know when and why I should use the ASMedia ports.
|
|
|
|
|
ASRock_TSD
ASRock_Official
Joined: 20 Mar 2015 Status: Offline Points: 8787 |
Post Options
Thanks(0)
Quote Reply
Posted: 23 Oct 2018 at 9:51am |
|
|
|
Post Reply
|
Page 12> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options