ASROCK J5040-ITX no WOL with LAN-card

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   ASROCK J5040-ITX with PicoPSU-90 
M.2 NGFF nvme SSD zu M.2 rizer card
970 EVO Plus 250 GB NVMe M.2
running OpenMediaVault V6

WOL is working perfect with internal GBit LAN card
But not working with Dual Port 2,5G RTL8125BG-CG & ASM1806 on PCIe X1 Slot ??

>ethtool enp4s0
>Supports Wake-on: pumbg
>Wake-on: g

PCIe Devices Power On in BIOS
Tried with Wake-up from internal network card on/off

I discovered a difference on RTL8125BG pins:
Pin 36 PERSTB on upper RTL is connected to PCIe Pin B11 WAKE#
seems the lower RTL is not ?

I always tried WOL on both LAN connectors of that card

Workaround at the moment: connecting 2 LAN cables, assigning 2 IP addresses, 
sending WOL to first IP; 
getting fast data from the other   

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
muctop17 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Jun 2023 Status: Offline Points: 20	Post Options Post Reply Quote muctop17 Report Post Thanks(0) Quote Reply Topic: ASROCK J5040-ITX no WOL with LAN-card Posted: 29 Jun 2023 at 8:03pm
	ASROCK J5040-ITX with PicoPSU-90 M.2 NGFF nvme SSD zu M.2 rizer card 970 EVO Plus 250 GB NVMe M.2 running OpenMediaVault V6 WOL is working perfect with internal GBit LAN card But not working with Dual Port 2,5G RTL8125BG-CG & ASM1806 on PCIe X1 Slot ?? >ethtool enp4s0 >Supports Wake-on: pumbg >Wake-on: g PCIe Devices Power On in BIOS Tried with Wake-up from internal network card on/off I discovered a difference on RTL8125BG pins: Pin 36 PERSTB on upper RTL is connected to PCIe Pin B11 WAKE# seems the lower RTL is not ? I always tried WOL on both LAN connectors of that card Workaround at the moment: connecting 2 LAN cables, assigning 2 IP addresses, sending WOL to first IP; getting fast data from the other
	The answer is 42