A68M-ITX DDR3 2400 compatibility |
Post Reply |
Author | |
aquelito
Newbie Joined: 26 Jan 2016 Status: Offline Points: 15 |
Post Options
Thanks(0)
Posted: 15 Mar 2016 at 12:32am |
Hello there,
I would like to know if the A68M-ITX will be able to run either one of these DDR3 kits at 2400Mhz : Given the available compatibility list, I do not see any reason why it shouldn't work ! I already purchased the mobo with an A8 7600. Thanks by advance for your help, A.
Edited by aquelito - 15 Mar 2016 at 12:35am |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Contact G.Skill at http://www.gskill.com/en/contact for your area and inquire with them.
You may or may not get a satisfactory answer back as the A68 is a low power chipset destined for inexpensive note books. But try anyways. |
|
parsec
Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
|
2400 speed memory is considered an OC on this platform, and the memory controller in the CPU will determine the potential memory speed much more than the board itself will.
Both of the memory models you listed seem to be designed for Intel platforms. The G.SKILL Ares, in its QVL section, only lists Intel chipset boards for ALL of the manufactures included. Zero AMD boards. Given the compatibility lists, why do you think this memory WILL work? |
|
aquelito
Newbie Joined: 26 Jan 2016 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Hi there,
Yes you are totally right. I mixed up my links with this ref, which is compatible with A88 boards : http://www.gskill.com/en/product/f3-2133c9d-8gab That's why I assumed it would work with an A68 board, although I found very few info in this particular chipset.
|
|
aquelito
Newbie Joined: 26 Jan 2016 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Anwer from G.Skill support :
I finally ended up purchasing a 2133 A-DATA kit from the Asrock compatibility list. Did not look to this brand before as it is merely distributed in France : http://www.newegg.com/Product/Product.aspx?Item=N82E16820211842 Edited by aquelito - 22 Mar 2016 at 4:21pm |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Online Points: 24398 |
Post Options
Thanks(0)
|
ADATA is a solid brand, I have been using both their RAM and SSDs for years now and never had an issue with them. Build quality is top notch and my DDR3 1600 kit overclocked to 2133 on my Z97 Extreme3 system with very respectable timings and no extra voltage. Their SSDs are also very good value and often perform better than higher priced better known brands. I do generally prefer the better known brands but ADATA has done well by me.
[edit] Just to add, I am not trying to sell anyone on ADATA, only stating my experience with their products. Edited by Xaltar - 22 Mar 2016 at 4:54pm |
|
|
|
aquelito
Newbie Joined: 26 Jan 2016 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Hi Xaltar,
Are you confident this particular ADATA kit will run at 2133 on my A68 board ?
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Online Points: 24398 |
Post Options
Thanks(0)
|
Without having tested that combo myself I couldn't say.
|
|
|
|
aquelito
Newbie Joined: 26 Jan 2016 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
I purchased the exac tsame reference as listed in the Asrock compatibility list but G.Skill answer sure raises doubts...
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Again, The A68 chipset is low powered and more destined to a non-oc'd laptop. Having said that, I'd imagine with feeding it considerable voltage, and with some serious 3rd party cooling, the A68 could, could maybe, hit and or support 2400. I wouldn't place much hope in doing so though, regardless of what ASRoock spec'd it at. Afterall, it's a Mini-ITX board and with the reduction in size should probaby come a reduction of expectations. Too much electrical traces packed into/onto such a small board. And then the temperature factor what with basically an ATX board reduced to M-ITX and much oc'ing and the boards heat density begins affecting the traces. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |