J3455-itx bios csm boot issue

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I am trying to use csm boot in order to run a memtest.
The problem is under csm module, it is impossible to enter bios after the graphics mode is selected to legacy only.
That is after csm module is enabled, the only way to enter bios is to reset bios settings by clearing cmos.
It should be possible to select both legacy and uefi video, or there needs to be another bios version which can boot under csm module.
The problem occurs under the latest bios version which is 1.10

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
matrix2020 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 Nov 2016 Location: Private Status: Offline Points: 9	Post Options Post Reply Quote matrix2020 Report Post Thanks(0) Quote Reply Posted: 10 Nov 2016 at 8:27pm
	I am trying to use csm boot in order to run a memtest. The problem is under csm module, it is impossible to enter bios after the graphics mode is selected to legacy only. That is after csm module is enabled, the only way to enter bios is to reset bios settings by clearing cmos. It should be possible to select both legacy and uefi video, or there needs to be another bios version which can boot under csm module. The problem occurs under the latest bios version which is 1.10