|
FM2A88M Pro3+ no signal in monitor |
Post Reply 
|
| Author | |
kvkpls 
Newbie 
Joined: 02 Dec 2016 Status: Offline Points: 4 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: FM2A88M Pro3+ no signal in monitorPosted: 02 Dec 2016 at 9:26pm |
|
I recently bought FM2A88M Pro3+ Motherboard and I set it with an AMD A8-7600 CPU. Everything seems to be connected correctly, however there is no signal in the monitor. Since A CPU series has an integrated graphics card, it should have been on. I even tried a trick to disconnect all cables, keep the power button pressed for 1 minute and then reconnect the monitor. Nothing seems to be happening. The monitor is connected to D-sub. I also switched cables but nothing happened. Any suggestions?
Edited by kvkpls - 02 Dec 2016 at 9:33pm |
|
 |
|
|
parsec
Moderator Group 
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(1)
Quote Reply
Posted: 03 Dec 2016 at 1:28am |
What is the exact model of memory you are using, and the amount of memory being used? Do you have the four pin CPU power cable from the PSU connected to the board? An FM2+ A8-7600 CPU should be compatible with every BIOS version. |
|
|
|
|
|
|
kvkpls
Newbie
Joined: 02 Dec 2016 Status: Offline Points: 4 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Dec 2016 at 2:23am |
|
Yes, you were right. The four pin cable for the CPU was not connected. Thanks!
|
|
|
|
|
bittyb
Newbie
Joined: 30 Dec 2016 Location: United States Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 Dec 2016 at 12:07am |
|
Same deal happened to me. Just bought the asrock fm2a88m pro3+ and paired it with the amd athlon x4 860k. Everything looks like it is hooked up correctly and I got a thumbs up from one of my friends who is good with computers and works with them for his job. He said that it must be the motherboard. Any suggestions?
|
|
|
|
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 25028 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 Dec 2016 at 12:34am |
|
You need to have a dedicated GPU with the FM2+ Athlon. Only A series APUs provide onboard graphics. If you do not have a dedicated GPU installed the system has no graphics.
FM2+ Athlon CPUs have no integrated graphics. A series APUs (A4, A6, A8, A10) do.
Now if you do have a dedicated GPU installed then make sure all the power connectors are connected, the 24pin and the 4/8pin CPU power. |
|
|
|
|
|
|
bittyb
Newbie
Joined: 30 Dec 2016 Location: United States Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 Dec 2016 at 1:24am |
|
Thank you!
|
|
|
|
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 25028 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 Dec 2016 at 2:31am |
|
Happy to help
 This is a very common issue, it is easy to assume that the graphics come from the motherboard because there are video outputs. Even in the manual it is easy to miss the fact that the onboard graphics require an A series APU to function. The Athlon x4 860k is a great little CPU, enjoy your new PC  P.S. I am guessing your friend did not know that you were using an Athlon CPU? If he did you should probably tell him the information I shared with you here, it will save him headaches at work
 |
|
|
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
kvkpls wrote: