ASRock.com Homepage
Forum Home Forum Home > Technical Support > Intel Motherboards
  New Posts New Posts RSS Feed - Z270 Extreme4 does not start
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

Z270 Extreme4 does not start
 Post Reply Post Reply Page  12>
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
wjurek View Drop Down
Newbie
Newbie


Joined: 04 Mar 2017
Status: Offline
Points: 9 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wjurek Quote  Post ReplyReply Direct Link To This Post Topic: Z270 Extreme4 does not start
    Posted: 04 Mar 2017 at 5:34am
Hi guys,

I built a system with:
Z270 Extreme4 motherboard
Intel i5 7600K
Corsair DDR4 16GB 2400 Vengance LPX
Samsung SSD 960 EVO 500GB
secondary HDD Seagate 2TB

Motherboard LEDs blink when I switch it on. After a second it restarts and still blinks.
There is no signal on HDMI, DVD works, CPU fan works, case fans don't work.

Can someone advise how can I investigate what is the issue? Is there any Dr Debug for this motherboard?
I plugged both power connectors. Case doesn't have speaker so I didn't plug anything to 7-pin SPK_PLED.

Thank you for any help. It is hard to google it cause it is quite new mobo.
wjurek 
Back to Top
wardog View Drop Down
Moderator Group
Moderator Group


Joined: 15 Jul 2015
Status: Offline
Points: 6447 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wardog Quote  Post ReplyReply Direct Link To This Post Posted: 04 Mar 2017 at 10:59am
Originally posted by wjurek wjurek wrote:

Is there any Dr Debug for this motherboard?


Odd, they seem to have omitted the Dr Debug codes from your manual: Confused
http://www.asrock.com/support/faq.asp?id=334




My guess, the Corsair DDR4 16GB 2400 Vengance LPX kit isn't compatible. From what youu describe anyways.

Either post the Kit P/N here or check yourself at:
http://www.corsair.com/en-us/memory-finder



Keep us posted please.
Back to Top
wardog View Drop Down
Moderator Group
Moderator Group


Joined: 15 Jul 2015
Status: Offline
Points: 6447 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wardog Quote  Post ReplyReply Direct Link To This Post Posted: 04 Mar 2017 at 11:02am
Originally posted by wjurek wjurek wrote:

.........CPU fan works, case fans don't work.



Whoa there

Case fans do or do not work?
Back to Top
parsec View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 04 May 2015
Location: USA
Status: Offline
Points: 4996 		Post Options Post Options   Thanks (0) Thanks(0)   Quote parsec Quote  Post ReplyReply Direct Link To This Post Posted: 04 Mar 2017 at 12:43pm
No Dr. Debug display on your board.

The POST beep speaker would be connected to the four pin speaker connection. But that connector is not enabled by default in the UEFI/BIOS, so you would not hear any POST beeps until you can get into it and enable that option.

You have case fans connected to the mother board, but they are not spinning?

What PSU model do you have?
Back to Top
wjurek View Drop Down
Newbie
Newbie


Joined: 04 Mar 2017
Status: Offline
Points: 9 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wjurek Quote  Post ReplyReply Direct Link To This Post Posted: 04 Mar 2017 at 4:14pm
CPU fan works
Case fans do not work even though they are connected to motherboard.
PSU is Corsair VS650 
Back to Top
Xaltar View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 16 May 2015
Location: Europe
Status: Offline
Points: 25073 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Xaltar Quote  Post ReplyReply Direct Link To This Post Posted: 04 Mar 2017 at 4:36pm
Power not getting to the case fans but getting to the CPU fan is very odd. 

Try disconnecting all the case fans and leaving just the CPU fan connected. If there is some kind of short on the case fans it could be causing safety features to kick in.

If that does not work I would try with another PSU, it is also a good idea to take the board out of the case and bench run it. Check for any motherboard standoffs in the wrong places or any other things under the board that could cause a short (loose screws etc).
Back to Top
wjurek View Drop Down
Newbie
Newbie


Joined: 04 Mar 2017
Status: Offline
Points: 9 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wjurek Quote  Post ReplyReply Direct Link To This Post Posted: 04 Mar 2017 at 4:59pm
I have this memory
Vengeance® LPX 16GB (1x16GB) DDR4 DRAM 2400MHz C16 Memory Kit - Black (CMK16GX4M1A2400C16) P/N 48-08877 rev AA
If you are sure it is not compatible with motherboard I have please suggest what memory I should get.

Cheers,
wjurek
Back to Top
Xaltar View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 16 May 2015
Location: Europe
Status: Offline
Points: 25073 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Xaltar Quote  Post ReplyReply Direct Link To This Post Posted: 04 Mar 2017 at 5:08pm
At this point the more concerning point is that the case fans attached to the board are not spinning up while the CPU fan is. This to me indicates another problem, the RAM could well be incompatible but it should not behave in that way even if the RAM is not supported.
Back to Top
wjurek View Drop Down
Newbie
Newbie


Joined: 04 Mar 2017
Status: Offline
Points: 9 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wjurek Quote  Post ReplyReply Direct Link To This Post Posted: 04 Mar 2017 at 5:30pm
I tried all this before posting the initial query.
1. I made sure both power connectors are properly set
2. Tried without case fans connected
3. Run the test with motherboard outside the case
4. Removed CPU and looked for bend pins
5. Tried with memory in slots 1,2, 3

Every time same behavior. Or LED blinking in blue, quite slowly.
PSU is 650W so I guess shouldn't be an issue.

I'm unable to find information confirming that my memory is not compatible.
Corsair site says that memory is compatible with x99 and x100. Does this mean it is not good for z270?
http://www.corsair.com/en-us/vengeance-lpx-16gb-1x16gb-ddr4-dram-2400mhz-c16-memory-kit-black-cmk16gx4m1a2400c16
Back to Top
wjurek View Drop Down
Newbie
Newbie


Joined: 04 Mar 2017
Status: Offline
Points: 9 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wjurek Quote  Post ReplyReply Direct Link To This Post Posted: 04 Mar 2017 at 5:32pm
Originally posted by Xaltar Xaltar wrote:

At this point the more concerning point is that the case fans attached to the board are not spinning up while the CPU fan is. This to me indicates another problem, the RAM could well be incompatible but it should not behave in that way even if the RAM is not supported.

Does this indicate problem with motherboard, case or PSU. Unfortunately I don't have spare units to replace each of them and try.
Back to Top
 Post Reply Post Reply Page  12>
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.172 seconds.