|
Z170M Pro4s dead? |
Post Reply 
|
| Author | |||
p23098 
Newbie 
Joined: 16 Mar 2017 Status: Offline Points: 4 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Z170M Pro4s dead?Posted: 16 Mar 2017 at 9:29am |
||
|
Hi all,
I think my Z170M Pro4s is dead and would appreciate your helping determining if that is the case. The motherboard and all components are about 1 year old and worked as expected until today. Last night Windows 10 wanted to reboot overnight to apply an update. Today I got absolutely nothing from trying to boot the machine. No lights, no fan, no noticeable activity. Also, there was neither a burnt plastic smell nor any visible damage or scorch marks. What I've tried so far: - Pulled all components - Reseated all power connectors on the motherboard - Pulled the motherboard from the case - Reseated the CPU - Verified with another PC that power supply works - Verified that power supply for another PC does not boot the motherboard - Attempted to reset CMOS via the jumper. No way to tell whether it actually worked though Any other suggestions? thanks
Edited by p23098 - 16 Mar 2017 at 9:30am |
|||
 |
|||
|
wardog
Moderator Group 
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Mar 2017 at 9:46am |
||
|
|||
|
p23098
Newbie
Joined: 16 Mar 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Mar 2017 at 9:57am |
||
|
Corsair RM650, one year old.
|
|||
|
|||
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Mar 2017 at 10:22am |
||
That's not a good sign. Check that your cases power switch is good, and working. Have a shop nearby that can verify for you the board does or doesn't work? If not, I'd say it's RMA time.  Edited by wardog - 16 Mar 2017 at 10:24am |
|||
|
|||
|
ASRock_TSD
ASRock_Official 
Joined: 20 Mar 2015 Status: Offline Points: 8907 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Mar 2017 at 4:54pm |
||
|
Dear p23098, Greetings, this is ASRock TSD. According to your question, we provide some suggestions to verify: 1. Confirm the ATX 24-pin power cord and 8-pin v-core power cable are connected to M/B properly. 2. Please refer to the user manual(page.18) from the link below to clear CMOS to try(Please shut down the AC power). 3. Please clean the Goldfinger parts of memory and re-connect to the motherboard, make sure it has been installed correctly. 4. Only install the necessary devices (CPU and one stick memory) to check if the system can boot properly. 5. Only install one stick memory module to each DRAM slot by turns to try. 6. If possible, please install another CPU / memory module / PSU to verify. If the symptom still exists, we would suggest contacting your local dealer or distributor for further physical checking and assistance: Thanks! All the best, ASRock TSD |
|||
|
|||
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
p23098 wrote: