![]() |
New Build, bios freeze |
Post Reply ![]() |
Author | |
aburger ![]() Newbie ![]() ![]() Joined: 28 Mar 2017 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() Posted: 28 Mar 2017 at 5:28am |
I'll try the clear again and see if the freezing stops. If not, I'm thinking of trying different RAM since the current G-Skill sticks I have are not on the approved list for this board.
Thanks for all the help.
|
|
![]() |
|
aburger ![]() Newbie ![]() ![]() Joined: 28 Mar 2017 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
HahaHa!
G-Skill Model F4-2400C15Q-64GVR PSU is an EVGA SuperNOVA 1200P2 THanks
|
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 23993 |
![]() ![]() ![]() ![]() ![]() |
Clear CMOS and try the UEFI again.
If your UEFI freezing stops after the clear try out the custom fan profiles.
|
|
![]() |
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
What's the G.Skill part number?
Too. Is this Solar Powered? Or does it have a conventional switching PSU? ![]() Edited by wardog - 28 Mar 2017 at 5:16am |
|
![]() |
|
aburger ![]() Newbie ![]() ![]() Joined: 28 Mar 2017 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
Hi All, I recently put together a system with the following pertinent main components:
- ASRock Fatal1ty X99 Professional Gaming i7 LGA 2011-v3 Motherboard (bios v1.4) - Intel Core i7-6850K Broadwell-E 6-Core 3.6 GHz LGA 2011-V3 140W Processor - Corsair Hydro Series H100i V2 Extreme Performance Water / Liquid CPU Cooler - G.SKILL Ripjaws V Series 128GB (8 x 16GB) 288-Pin DDR4 SDRAM DDR4 2400 - MSI GeForce GTX 980TI GAMING 6G GOLDEN EDITION On first boot straight to bios: 1. The CPU votage was reading 1.72V which is insanely high 2. The motherboard was only reading (6) out of the eight sticks of RAM 3. The CPU fans are spinning at a constant 1500RPM and can't be adjusted in the bios After re-seating all the RAM modules, checking all connections and clearing the CMOS, the CPU voltage has dropped down to a relatively constant 1.29V and all (8) RAM modules are being seen giving me the full 128GB of RAM. Now the following issue is happening: 1. Once in the bios, the screen freezes after 30 seconds and the computer has to be restarted manually. I haven't made any changes to settings other than the above. 2. I still can't adjust the CPU fan speed, or any of the fans connected to the motherboard. Any help would be most appreciated. I can build a system, but I must admit I'm pretty stupid when it comes to troubleshooting. Thanks in advance.
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |