Memory timings advice

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I got bogged down with other issues over the last couple of weeks and did not get around to the timing tests as I had stated/indicated that I would.  That is until today when I tried a few timing changes/reboots/Load Bios Defaults...and with the newly flashed ver 3.10 BIOS.

Although little can be added from my prior post, I now can confirm that not only do I always get boot DRAM errors when I attempt to use any entry on the 'OC Tweaker/DRAM Timings' screen but also with the latest BIOS I am down to 2933mhz...-sniff-, from 3066mhz with the ver 3.00 BIOS.  - which was down from 3200mhz with ver 2.40/June AGESA 1.0.0.6 release.

The only way I get 2400/2666/2933 to work is to leave all entries on the 'OC Tweaker/DRAM Timings' screen to 'AUTO' and then enter my timings(some sub timings as well) on the 'Advanced/AMD CBS/DRAM Timings' screen.

I'll try to get images and possibly more tests this holiday(U.S.A) on Monday.  Afterwards I may flash back to the version 2.40 BIOS even though I found voltage issues with that version.  The 3.10 version appears to be just as stable with voltages as the 3.00 version from what I can tell over brief testing that I did today.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Kevin A Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 May 2017 Location: East Coast USA Status: Offline Points: 94	Post Options Post Reply Quote Kevin A Report Post Thanks(0) Quote Reply Posted: 03 Sep 2017 at 6:48am
	I got bogged down with other issues over the last couple of weeks and did not get around to the timing tests as I had stated/indicated that I would. That is until today when I tried a few timing changes/reboots/Load Bios Defaults...and with the newly flashed ver 3.10 BIOS. Although little can be added from my prior post, I now can confirm that not only do I always get boot DRAM errors when I attempt to use any entry on the 'OC Tweaker/DRAM Timings' screen but also with the latest BIOS I am down to 2933mhz...-sniff-, from 3066mhz with the ver 3.00 BIOS. - which was down from 3200mhz with ver 2.40/June AGESA 1.0.0.6 release. The only way I get 2400/2666/2933 to work is to leave all entries on the 'OC Tweaker/DRAM Timings' screen to 'AUTO' and then enter my timings(some sub timings as well) on the 'Advanced/AMD CBS/DRAM Timings' screen. I'll try to get images and possibly more tests this holiday(U.S.A) on Monday. Afterwards I may flash back to the version 2.40 BIOS even though I found voltage issues with that version. The 3.10 version appears to be just as stable with voltages as the 3.00 version from what I can tell over brief testing that I did today.