J3160M PCIE Problem

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I fixed it by using a SATA card from a different brand. For some reason 3 identical cards would not work.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
kokett Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Sep 2017 Status: Offline Points: 7	Post Options Post Reply Quote kokett Report Post Thanks(0) Quote Reply Topic: J3160M PCIE Problem Posted: 26 Sep 2017 at 11:00pm
	I fixed it by using a SATA card from a different brand. For some reason 3 identical cards would not work.

kokett Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Sep 2017 Status: Offline Points: 7	Post Options Post Reply Quote kokett Report Post Thanks(0) Quote Reply Posted: 23 Sep 2017 at 8:12pm
	No dice. Tried it with all three controllers and onboard SATA disabled. Only two out of three controllers are detected. I have now ordered a different PCIe x1 controller to rule out some possible quirky behaviour with three identical controllers installed. I'll report back next week.

wardog Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447	Post Options Post Reply Quote wardog Report Post Thanks(0) Quote Reply Posted: 21 Sep 2017 at 10:16pm
	Na, the SI-PEX40064 is bootable. Try doing so with ONLY your boot drive connected to it and post back please

kokett Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Sep 2017 Status: Offline Points: 7	Post Options Post Reply Quote kokett Report Post Thanks(0) Quote Reply Posted: 21 Sep 2017 at 10:04pm
	Hi wardog, I haven't, because I need the two onboard SATA in order to boot. It's possible that the two onboard SATA are using the PCI Express Lane of one of the PCIE Slots, but that should be mentioned in the manual. J3160 has 4 PCIE x1 Lanes, I would have imagined that the Realtek Gigabit LAN and the SATA Controllers share the fourth Lane, leaving 3 Lanes for the 3 PCIE Slots (each x1)? J3455M has 6 PCIE x1 Lanes, maybe it would work with that board?

wardog Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447	Post Options Post Reply Quote wardog Report Post Thanks(0) Quote Reply Posted: 21 Sep 2017 at 8:05pm
	Ich benutze einen ?bersetzer, also bär mit mir. Haben Sie versucht, die Onboard-SATA-Ports / Controller zu deaktivieren? Ich habe schon ein paar Mal das gemacht. English: I'm using a translator, so bear with me. Have you tried disabling the onboard SATA ports/controller. I've had luck a few times doing that. .. wardog EDITED to make additions = Gefertigt, um Ergänzungen zu machen Edited by wardog - 21 Sep 2017 at 8:09pm

kokett Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Sep 2017 Status: Offline Points: 7	Post Options Post Reply Quote kokett Report Post Thanks(0) Quote Reply Posted: 21 Sep 2017 at 6:37pm
	Habe ich gestern mittag schon gemacht, danke.

J Z Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 09 Sep 2016 Location: Germany Status: Offline Points: 976	Post Options Post Reply Quote J Z Report Post Thanks(0) Quote Reply Posted: 21 Sep 2017 at 2:34pm
	Hallo, kann dazu leider nichts sagen und würde diese Anfrage zwecks ?berprüfung an unsere Technik weitergeben. Bitte dazu das Support-Formular ausfüllen. https://event.asrock.com/tsd.asp
	Kind Regards, JZ https://shop.JZelectronic.de - Der Shop mit ausgesuchter ASRock Profi Hardware https://www.facebook.com/asrock.de

kokett Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Sep 2017 Status: Offline Points: 7	Post Options Post Reply Quote kokett Report Post Thanks(0) Quote Reply Posted: 21 Sep 2017 at 5:36am
	Es geht um folgendes Board: https://geizhals.de/asrock-j3160m-90...-a1441426.html Anleitung: https://gzhls.at/blob/ldb/1/f/4/d/60...5dce9e9b2c.pdf Ich will in den drei PCIE Slots drei Stück dieser Controllerkarten betreiben: https://www.amazon.de/gp/product/B00...?ie=UTF8&psc=1 Die Teile haben keine RAID Funktion und kein eigenes BIOS, Anbindung via PCIE 2.0 x1. Laut Handbuch sollte das kein Problem sein, die Slots sind alle elektrisch mit x1 angebunden, auch der mechanische x16 Slot. Die Slots sind auch lt. Handbuch nicht geteilt, also Vollbestückung deaktiviert keinen der drei Slots. Es funktioniert trotzdem nicht, es werden nur zwei der drei Controllerkarten erkannt. Defekt ist keine, ich habe sie in den Slots mal hin und hergetauscht. Im BIOS habe ich unbenötigte Geräte deaktiviert (HD Audio, Parallel und Serial Port), das hat aber auch nicht geholfen. Gibt es - warum auch immer - ein generelles Limit an SATA Erweiterungskarten von dem ich nichts wei?? Hat evtl. jemand eine Idee woran es liegen könnte bzw. wie ich es doch noch zum laufen bekomme? Ich wollte einen stromsparenden Heimserver aus dem System machen und brauche viele SATA Ports - Geschwindigkeit ist nicht so wichtig; x1 PCIE 2.0 reicht.