Intel Management Engine Issue INTEL-SA-00086 Fix |
Post Reply | Page <1 34567 13> |
Author | |
arturk
Newbie Joined: 07 Jul 2017 Status: Offline Points: 13 |
Post Options
Thanks(1)
|
hoisdom
Newbie Joined: 27 Nov 2017 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Edited by hoisdom - 25 Dec 2017 at 11:32pm |
|
chris719
Newbie Joined: 17 Dec 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
|
jclausius
Newbie Joined: 02 Jan 2018 Location: USA Status: Offline Points: 37 |
Post Options
Thanks(0)
|
Hi there... I'm a bit confused after reading the posts in this thread.
Can anyone confirm if you're on x299 based mobos with Gen 8 CPUs, has anyone seen a patch from ASRock? I get the 'mismatch SKU' error with the ME1 download. However, the intel bulletin says my config is susceptible - https://security-center.intel.com/advisory.aspx?intelid=INTEL-SA-00086&languageid=en-fr Also, can anyone with X299 platform based boards confirm the version of ME on their system? For example, for me: System Board: x299e-itx/ac CPU: i7-7820x ME Version: 11.10.0.1287 |
|
jclausius
Newbie Joined: 02 Jan 2018 Location: USA Status: Offline Points: 37 |
Post Options
Thanks(0)
|
dbeachy1
Newbie Joined: 05 Jan 2018 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
I'm getting the same error ("Error
8704: Firmware update operation not initiated due to a SKU mismatch") running the "ME1" patch on my ASRock X299 Taichi board with an Intel i9-7900X CPU. I see this issue was first reported six weeks ago in another thread, so I'm surprised there is still no fix for it. As I understand it, the error means that the firmware patch does not apply to my CPU (???).
I've updated my Windows build to 16299.192 via the Microsoft security patch, but the Intel detection tool for INTEL-SA-00086 still shows my system as vulnerable since the Intel ME firmware patch won't install on my system. I opened a support ticket with ASRock about it, so I'll report back if and when I get more information. Edited by dbeachy1 - 05 Jan 2018 at 1:12am |
|
jclausius
Newbie Joined: 02 Jan 2018 Location: USA Status: Offline Points: 37 |
Post Options
Thanks(0)
|
That's good news. Seems the ME1 patch doesn't work because it doesn't support the Skylake-X processors... At least that is what I recall reading.
I emailed ASRock about 10 days ago. Hopefully they get back to you. Thanks for any follow-up info. |
|
dbeachy1
Newbie Joined: 05 Jan 2018 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Some interesting news here -- I heard back from ASRock support tonight, and here is the message:
============================================ From: Support [mailto:<redacted>]
check the information below if your motherboard chipset is effected
Intel released the newer ME version to fix the security bug recently. The models 100/200/300 could be updated ME firmware by ME tool directly. Please be noted that there are two different ME type for our models.
1. Consumer ME Chipset: Z170, Z270, H110, B250, H270, Z370 Consumer ME link: http://asrock.pc.cdn.bitgravity.com/TSD/ME-consumer_11.8.50.3425.zip
2. Corporate ME Chipset: H170, B150, Q170 Corporate ME link: http://asrock.pc.cdn.bitgravity.com/TSD/ME-corporate_11.8.50.3425.zip
Microsite link: Reference: http://www.asrock.com/microsite/2017IntelFirmware/ ============================================ I replied and said
that I had already tried running that Consumer ME patch version per my
original message. What is interesting, however, is that support said
that the consumer ME patch only supports these chipsets: 1. Consumer ME Chipset: Z170, Z270, H110, B250, H270, Z370 I
replied and asked if they know if and when a version of the patch for
the X299 chipset, which is what my motherboard uses, will be available.
So this explains why the patch doesn't work with our X299 boards: the patch doesn't support that chipset. Hopefully ASRock will make an X299 version of the ME firmware patch available soon. EDIT: Also, according
to the INTEL-SA-00086 Detection Tool, my Intel Management Engine version is
11.10.0.1287, so clearly the ME version for X299 boards is separate from the ME versions that the ASRock ME patch is supposed to update.
Edited by dbeachy1 - 05 Jan 2018 at 11:39pm |
|
jclausius
Newbie Joined: 02 Jan 2018 Location: USA Status: Offline Points: 37 |
Post Options
Thanks(0)
|
Hopefully they'll respond with an x299 version is available soon!! If so, please let us know. Thanks again. -jclausius Edited by jclausius - 06 Jan 2018 at 3:52am |
|
tsunami2311
Newbie Joined: 19 Jun 2016 Status: Offline Points: 43 |
Post Options
Thanks(0)
|
just did http://asrock.pc.cdn.bitgravity.com/TSD/ME-consumer_11.8.50.3425.zip
on my z170 extreme 4 it now says i am patched but also goes on about some intel license client is obsolete http://www.guru3d.com/news-story/new-hardware-vulnerability-found-in-intel-processors.html how much of this Spectre??and ?�Meltdown??br>does this apply too or am i gona need another fw update update? Im still using bios update 3.20 i only did this update for the above, I am assuming if I did the bios update to 7.20 I would have reaplly thew above fix? i am also assuming asrock is gona release new bios for all this Edited by tsunami2311 - 06 Jan 2018 at 3:42am |
|
Post Reply | Page <1 34567 13> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |