![]() |
X399 Taichi won't boot |
Post Reply ![]() |
Author | |
Maplicito ![]() Newbie ![]() Joined: 20 Feb 2018 Location: Canada Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() Posted: 20 Feb 2018 at 1:30pm |
I have not been able to get my 1950x to boot on my X399 Taichi board. I have tried booting with only 1 or 2 RAM sticks, but get the same result. I have tried clearing the CMOS several times. I am getting a string of codes: de ad 21 13 34 - this string of codes repeats over and over. I get no output on my monitor. Where should I start looking next? I have verified that all PSU cables are plugged in, including the PCIe power cable to my video card. Any help would be greatly appreciated - I may not be able to respond quickly to questions, but I'll monitor this thread as I'm able. Thank you!
Ah - system is as follows: 1950x X399 Taichi Corsair CT4K8G4DFD8213 kit (4x8 GB) - although I'm not running all the sticks at the moment. Crucial MX300 525GB M.2 drive WD 4TB Gold hard drive. RX 560 4GB video card
|
|
![]() |
|
free-eagle ![]() Newbie ![]() Joined: 19 Oct 2017 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
Just make a Bios Update to the actual Version. You have a SATA M2 SSD and there ist a Problem with the some Bios Version.
You can install the Bios with a Fat32 formatted USB Stick and Pressing the Button on the Backside of the MB. Refer to the Manual. |
|
X399 Taichi (Bios 2.0), TR 1920X, 32 GB GSKILL F4-3600C16D-16GTZSW, 2x Samsung 960 Pro 512GB (RAID 0),Crucial 1 TB SSD, 2x 4TB Seagate HDD (RAID 1), Zotac 1080TI AMP Extreme, Windows 10 Pro (1709)
|
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
![]() |
|
kerberos_20 ![]() Senior Member ![]() ![]() Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3657 |
![]() ![]() ![]() ![]() ![]() |
dr debug loop with "de ad" and few random others alongside it is always RAM, nothing else
try to insert you ram sticks according to manuals a2/b2 + c2/d2 if that still wont work, then u will need different RAM modules |
|
![]() |
|
Maplicito ![]() Newbie ![]() Joined: 20 Feb 2018 Location: Canada Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() |
This was the answer - RAM's fine, everything else is fine. The computer is a massive tower in an awkward place to get to the back, so I just pulled the M.2 drive, booted into the BIOS, and updated from there - reinstalled the M.2 drive, and everything is working. Now, I just have to get through work on 4 hours of sleep, and I'll install Windows when I get home. Thanks a lot!
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |