|
Warning, J3455B/J3455-ITX/J4205-ITX BIOS brick ! |
Post Reply 
|
Page 123 7> |
| Author | |
Stefan75 
Newbie 
Joined: 15 Feb 2017 Location: Switzerland Status: Offline Points: 80 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Warning, J3455B/J3455-ITX/J4205-ITX BIOS brick !Posted: 12 Mar 2018 at 8:48pm |
|
Oh no...
Just went from J3455-ITX BIOS 1.4 to 1.5 without problems. Then used winflash to go to 1.6, after flash complete and reboot, no more video output  Took the battery out, waited, nothing. Edited by Stefan75 - 13 Mar 2018 at 5:24pm |
|
|
http://cellarcinema.info
|
|
 |
|
|
wardog
Moderator Group 
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2018 at 12:20am |
|
I wish ASRock would stop producing BIOSes that can be flashed within Windows.
DOS or Instant Flash. PERIOD. |
|
|
|
|
Envio
Newbie
Joined: 13 Mar 2018 Location: Romania Status: Offline Points: 6 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2018 at 1:28am |
|
Same problem with J4205. Updated from 1.3 to 1.5=> no problem. Updated from 1.5 to 1.6 no image on HDMI or VGA. Didn't remove battery because i read that BIOS jumper or battery should not be removed after BIOS update.
Does anybody know a solution to make it work again? I did BIOS update because the mouse was lagging in BIOS and in Windows 10. I wish i didn't.... |
|
|
|
|
Envio
Newbie
Joined: 13 Mar 2018 Location: Romania Status: Offline Points: 6 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2018 at 3:39am |
|
|
|
3vil5
Newbie
Joined: 09 Mar 2018 Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2018 at 4:36am |
|
i have update 1.4 to 1.5 and then 1.5 to 1.6 without problem. I have used istant flash.
And probably, i say "probably" i have solved the HDMI problem with the tv... i'm doing lot of tests with the tv to be sure becouse i have booked the return of the mobo for tomorrow... |
|
|
|
|
3vil5
Newbie
Joined: 09 Mar 2018 Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2018 at 4:37am |
|
i think clear cmos or remove the battery dosen't work. That procedure is to reset the changes made to bios setting, no "clear" the bios. But i hope to be wrong |
|
|
|
|
Kaine
Newbie
Joined: 13 Mar 2018 Status: Offline Points: 10 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2018 at 4:59am |
|
|
|
McLeft
Newbie
Joined: 05 Sep 2016 Status: Offline Points: 16 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2018 at 7:55am |
|
Jut got J3455B biricked with 1.70. Clear CMOS/Battery removal - nothing worked.
|
|
|
|
|
marcolo88
Newbie
Joined: 13 Mar 2018 Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2018 at 8:21am |
|
Hi,
the same model...made update (internet update from bios) and blocked at 49% Now it doesn't work nothing... i tried to clear cmos and battery...but i have the same problem (when i switch on, i don't have video signal, but disk and fan works. I try to keep remove cmos for 4 hours how some guide said ... but i think it will not work! |
|
|
|
|
Envio
Newbie
Joined: 13 Mar 2018 Location: Romania Status: Offline Points: 6 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2018 at 1:34pm |
|
After 10 hours of clear BIOS and battery removed, no succes in starting anything...
I wish someone from Asrock tech support tell what to do with a less than 10 hours usage. A sucessfull BIOS update = failed BIOS update. |
|
|
|
|
Post Reply
|
Page 123 7> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Envio wrote: