![]() |
z370 taichi ram defualts to 2133 |
Post Reply ![]() |
Author | |
dachronic ![]() Newbie ![]() ![]() Joined: 14 Apr 2018 Status: Offline Points: 7 |
![]() ![]() ![]() ![]() ![]() Posted: 14 Apr 2018 at 6:53am |
I purchased a pc from cyberpowerpc and had various issues and multiple BSOD's and found out cyberpower had put the wrong ram timings and was causing all the issues I was having. Memtest86 stopped testing after 10,000 errors
![]() Specs: i7-8700k ASRock Z370 taichi G. Skill RipJaws - 3000mhz ( 8 x 2 ) EVGA Geforce 1080 ti FTW3 Samsung 960 evo m.2 SSD 500gb WD 3TB mechanical |
|
![]() |
|
badbri ![]() Groupie ![]() Joined: 20 Feb 2018 Location: USA Status: Offline Points: 415 |
![]() ![]() ![]() ![]() ![]() |
https://www.passmark.com/baselines/V9/display.php?id=99573335296
|
|
![]() |
|
dachronic ![]() Newbie ![]() ![]() Joined: 14 Apr 2018 Status: Offline Points: 7 |
![]() ![]() ![]() ![]() ![]() |
Thanks for the reply, the model number is F4-3000C15S-8GVRB and it's on the QVL list. The timings are 15-16-16-35 and voltage 1.35. Sticker also says XMP 2.0 ready
Edited by dachronic - 16 Apr 2018 at 3:00am |
|
![]() |
|
dachronic ![]() Newbie ![]() ![]() Joined: 14 Apr 2018 Status: Offline Points: 7 |
![]() ![]() ![]() ![]() ![]() |
Tried again today, If I change Load XMP setting from auto to XMP Profile 1 it will change the target memory speed from 2133 to 3000mhz but when I save changes and exit it tries to boot 3 times and bios screen comes up saying windows failed to boot too many times and I have to change Load XMP setting back to auto which reverts it to 2133.
|
|
![]() |
|
ASRock_TSD ![]() ASRock_Official ![]() Joined: 20 Mar 2015 Status: Offline Points: 8937 |
![]() ![]() ![]() ![]() ![]() |
Dear Dachronic,
Thank you for choosing ASRock.
Regarding your case, we provide some suggestion to try. 1. Please update BIOS to the latest version. http://www.asrock.com/mb/Intel/Z370%20Taichi/index.asp#BIOS 2. Please install the memory at A2, B2 slot. 3. Please only install one stick memory to check if the system can work at 3000MHz properly. 4. Please change another memory to try step 3.
Yours truly, ASRock TSD |
|
![]() |
|
dachronic ![]() Newbie ![]() ![]() Joined: 14 Apr 2018 Status: Offline Points: 7 |
![]() ![]() ![]() ![]() ![]() |
I checked the QVL list again and that specific model number is Not on the QVL list , there are a few g skill 3000mhz models on the QVL but not mine specifically F4-3000C15S-8GVRB so I guess I will have to see if I can RMA the ram thru cyberpowerpc or I'll just have to drop 200$ and buy new ram that is on the list.
|
|
![]() |
|
badbri ![]() Groupie ![]() Joined: 20 Feb 2018 Location: USA Status: Offline Points: 415 |
![]() ![]() ![]() ![]() ![]() |
That ram is on G.Skill QVL for your board (which is good) so should work if you are not overclocking the cpu.
If you are not overclocking the CPU you might get the ram to work by changing the timing a bit. You should try 16-18-18-38 just to see if it works... |
|
https://www.passmark.com/baselines/V9/display.php?id=99573335296
|
|
![]() |
|
dachronic ![]() Newbie ![]() ![]() Joined: 14 Apr 2018 Status: Offline Points: 7 |
![]() ![]() ![]() ![]() ![]() |
So updated bios to newest version 1.80 which supports more memory
compatibility but I'm still left with the same issue. If I try to do the
timings manually it boot loops, if I change XMP profile from auto to
profile 1 it boot loops, and if I set target speed to dd4-3000 it boot
loops. The only way to get it to boot into windows is by leaving XMP
profile to auto.
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |