N68-S support |
Post Reply | Page <12 |
Author | |
parsec
Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
|
Very curious the X2 560 was skipped over in the CPU support list. There must be a reason.
The X2 560 is one of the "unlock two core to four core" processors, and one of the more popular and successful versions of that type. The X2 565 was not as good for unlocking to four cores. The N68-S board does not have the ASRock UCC feature, correct? UCC is Unlock CPU Cores. The N68SC-UCC version of this board has the UCC feature, as well as a stronger CPU VRM stage. Perhaps the X2 560 could be unlocked to four cores with a BIOS modification, which I read had it up to 140W TDP. The N68-S board cannot handle that power demand. |
|
ASRock Expert
Newbie Joined: 04 Oct 2015 Location: Croatia Status: Offline Points: 220 |
Post Options
Thanks(0)
|
990FX Extreme 9 MOD P1.70
AMD FX 8120 4GHz 1.25V Thermalright HR-02 Patriot Viper 2x4GB 2133MHz Samsung 850 EVO 250GB MSI R7970 TFIII 3GB CORSAIR VX550W LanCool K62 Dragonlord ASUS Xonar D2X |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25028 |
Post Options
Thanks(0)
|
I would never recommend cross flashing, especially here on the official ASRock forums. Its something I may try myself out of interest but I strongly advise against it for anyone not experienced with flashing and the precautions necessary.
The only time I would advise a cross flash is if ASRock_TSD (tech support) say that it will work and to do it. ASRock Expert does not work for ASRock, he is a regular forum member the same as you. I am in no way insulting him, his forum name however can lead to confusion. Only forum members with 4 or more stars are moderators or representatives of ASRock, like Tech support and News etc.
|
|
ASRock Expert
Newbie Joined: 04 Oct 2015 Location: Croatia Status: Offline Points: 220 |
Post Options
Thanks(0)
|
Yup, i'm not working for ASRock in any way - but I have done cross-flashing myself
and sometimes I mod BIOS-es for myself. I'm not responsible for any "dead" EEPROM done by cross-flashing. But on the good side - ASRock EEPROM chip is easy replaceable with a new one, provided by ASRock TSD. They are not hard soldered on the MBO, and thats one of my favorite ASRock features on they boards.
|
|
990FX Extreme 9 MOD P1.70
AMD FX 8120 4GHz 1.25V Thermalright HR-02 Patriot Viper 2x4GB 2133MHz Samsung 850 EVO 250GB MSI R7970 TFIII 3GB CORSAIR VX550W LanCool K62 Dragonlord ASUS Xonar D2X |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25028 |
Post Options
Thanks(0)
|
I love this too, although other manufacturers also do it I have noticed ASRock seem to be very good with getting you a new chip. BIOS modding can be a lot of fun for those with the skills to do it but it isn't for the feint of heart or the amateur Also just a little FYI, the 2 boards pictured are not in fact identical, they use different caps and power delivery, there is also an additional IC just under the socket as well as it's supporting resistors and caps etc.
Edited by Xaltar - 27 Oct 2015 at 5:00pm |
|
ASRock Expert
Newbie Joined: 04 Oct 2015 Location: Croatia Status: Offline Points: 220 |
Post Options
Thanks(0)
|
I have worked with many ASRock ITC CPU on-board MBO's,
and some recent have the EEPROM hard soldered. http://www.asrock.com/mb/Intel/N3150DC-ITX/index.us.asp |
|
990FX Extreme 9 MOD P1.70
AMD FX 8120 4GHz 1.25V Thermalright HR-02 Patriot Viper 2x4GB 2133MHz Samsung 850 EVO 250GB MSI R7970 TFIII 3GB CORSAIR VX550W LanCool K62 Dragonlord ASUS Xonar D2X |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25028 |
Post Options
Thanks(0)
|
Lets try and keep the thread on topic please.
In summation, do not attempt to cross flash your bios with one from a similar board, it most likely will brick the board (make it unusable entirely). If you were to brick the board however, you can purchase a new BIOS chip from ASRock directly that will get you up and running again. I sometimes order a spare for my systems anyway then mess about with things like cross flashing etc but I am a professional and know what I am doing
|
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |