usb 3.0 ports not working |
Post Reply |
Author | |
toosalt
Newbie Joined: 23 May 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
Posted: 23 May 2018 at 4:33pm |
hello,
ive just recently got a z370 fatality gaming k6 board. Im unable to get the usb 3.0 ports on the motherboard to work. the 3.1 works and the 3.0s and 2.0s on my case work but the fatality mouse port and the the 3 other usb 3.0s do not. im running windows 10 and have tried multiple devices in them with no luck.i have uninstalled and reinstalled the drivers through device manager. reset the bios cmos and made sure all ports are enabled. my bios is updated to 1.80 and windows says there is no othe updates i can do. usually i would trobleshoot my way through google but im all out of ideas. thanks for reading pls help haha
Edited by toosalt - 23 May 2018 at 5:36pm |
|
kanonir38rus
Newbie Joined: 27 May 2018 Location: Irkutks Status: Offline Points: 1 |
Post Options
Thanks(0)
|
toosalt
Newbie Joined: 23 May 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
yep still no luck, the only thing i can find is someone in a forum said if if legacy is enabled when you install windows 10 that may cause a problem for the ports but i cant be bothered reinstalling windows again. maybe later down the track i will
|
|
badbri
Groupie Joined: 20 Feb 2018 Location: USA Status: Offline Points: 415 |
Post Options
Thanks(0)
|
Curious.. which version of Windows 10 are you running ? The two USB 3.0 ports next to (below) the PS2 port are from the Z370 PCH and should work with any wired mouse and keyboard under all Win 10 versions. Same for the other two USB 3.0 ports under the Network port on the back panel.
Have you checked the BIOS under Advanced . USB to make sure all ports are set to Enabled ? |
|
https://www.passmark.com/baselines/V9/display.php?id=99573335296
|
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8727 |
Post Options
Thanks(0)
|
toosalt
Newbie Joined: 23 May 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
thanks for the reply.
Im currently running windows 10 pro. when in the bios i have the same results all usb ports on my case wether they be 2.0 or 3.0 work but on the mother board the only port that works is the light blue 3.1 port. only thing left to try is reinstalling windows . ( but im not quite ready as ive just finished setting everything else up the way i like it ). im about to buy a new case so when i swap my gear over ill try reinstalling windows. either way if its only 3 usb ports that dont work i dont think i can be bothered swapping the motherboard for the hastle that it will be . not sure how much use id get out of the fancy mouse port either. fingers crossed some sneaky windows update fixes things because im all out of luck Edited by toosalt - 31 May 2018 at 6:02pm |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24053 |
Post Options
Thanks(0)
|
The last thing you can try is this:
http://forum.asrock.com/forum_posts.asp?TID=630&title=how-to-clear-cmos-via-battery-removal That should completely clear CMOS as well as RTC and any hidden registers. If that doesn't help then you either need to RMA the board or just put up with it. Personally I would RMA if it's new and under warranty to avoid potential cascading issues down the road. The ports not working in the UEFI is a bad indicator. It should be fine if it's just a blown ESD fuse (Electro Static Discharge) but if the issue is with a controller it could get worse and effect other areas of the system. Better safe than sorry.
|
|
|
|
toosalt
Newbie Joined: 23 May 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Thanks for all of the replies. after exhausting all methods including clearing the cmos for a few hours. i took the motherboard back to the shop and showed them this conversation. they agreed it was faulty and swapped for a new board. took about 20 minutes and now i have a new board and all my ports work.
cheers guys
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |