ASRock.com Homepage
Forum Home Forum Home > Technical Support > Intel Motherboards
  New Posts New Posts RSS Feed - Z170 Extreme7+ / Samsung 950 Pro
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

Z170 Extreme7+ / Samsung 950 Pro
 Post Reply Post Reply Page  <12
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
parsec View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 04 May 2015
Location: USA
Status: Offline
Points: 4996 		Post Options Post Options   Thanks (0) Thanks(0)   Quote parsec Quote  Post ReplyReply Direct Link To This Post Posted: 06 Nov 2015 at 2:24pm
Originally posted by Starman63 Starman63 wrote:

I have 2 new 950 pros in a 170 OC Formula.

I have the raid created in the bios and it shows the raid is bootable.

However, when I go to load windows (Yes, I have loaded the Intel 64 bit driver) it recognizes the entire 1tb (almost) drive, but will not install to it because it says the drive is not bootable due to the controller...

I have tried MANY options and they all do the same thing.

GRRRR


Do you have the Launch Storage OpROM policy sub-option of the CSM option set to UEFI Only? Or are you installing with CSM disabled?

Did you load the IRST 14.6 F6 driver, from the Custom installation option?

You are in new territory with a RAID 0 of the 950 Pros as an OS drive. The controller message you mentioned worries me... this may not work, but I don't know yet either way. The Samsung NVMe driver is not an F6 type driver, it is wrapped up in an installer. Apparently the Windows NMVe driver won't work in RAID.

Keep trying and ask for more help if you want to.
Back to Top
parsec View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 04 May 2015
Location: USA
Status: Offline
Points: 4996 		Post Options Post Options   Thanks (0) Thanks(0)   Quote parsec Quote  Post ReplyReply Direct Link To This Post Posted: 06 Nov 2015 at 3:24pm
First results for my single, 256GB 950 Pro (all they had left at MicroCenter Angry )









The high queue depth 4K Read IOPs in AS SSD is hilarious! NO, that is NOT a RAPID (poisoned) result!

Otherwise the results are on spec IMO. I love to see the high 4K Random read speed, going over 50MB/s in AS SSD is rare, since it is the least forgiving benchmark.

Samsung really seems to have limited the write speed on the 950, since it does not match that of the SM951. That must be to reduce the 950's temperature and prevent throttling.

If only the IRST driver could preserve the high queue depth IOPS in RAID 0. The current driver results in the RAID 0 array having worse high queue depth 4K performance than a single drive, using SM951s. The IRST driver needs some work when it comes to its PCIe SSD support.

All of these results were with the Samsung NVMe driver installed.
Back to Top
Xaltar View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 16 May 2015
Location: Europe
Status: Offline
Points: 24653 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Xaltar Quote  Post ReplyReply Direct Link To This Post Posted: 06 Nov 2015 at 4:36pm
Damn that is quick. AS SSD is bugged for sure, as we discussed in my N3150M review. Over 50MB/s for 4k is Shocked!
Back to Top
Brimstead View Drop Down
Newbie
Newbie
Avatar

Joined: 07 Nov 2015
Status: Offline
Points: 1 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Brimstead Quote  Post ReplyReply Direct Link To This Post Posted: 07 Nov 2015 at 5:50am
Starman,
 
Had the same problem with installing Win10.  Turns out there are two options in the UEFI boot list for my Win10 USB memory stick.  One was listed as USB-MSFTWindows and the other was UEFI-MSFTWindows.  Both were referring to the same memory stick.  The USB gave the problem when I tried to install Windows.  The UEFI as the first boot device let me install win10 just fine.
Back to Top
DooRules View Drop Down
Newbie
Newbie
Avatar

Joined: 05 Nov 2015
Location: Newfoundland
Status: Offline
Points: 122 		Post Options Post Options   Thanks (0) Thanks(0)   Quote DooRules Quote  Post ReplyReply Direct Link To This Post Posted: 07 Nov 2015 at 6:19am
Came across this raid 0 result. Only an atto bench but interesting  none the less. Good scaling on writes, work to be done on the reads... this will be fun I thinkSmile

https://tinkertry.com/how-to-boot-win10-from-samsung-950-pro-nvme-on-superserver
Back to Top
STANKYLEG View Drop Down
Newbie
Newbie


Joined: 05 Nov 2015
Status: Offline
Points: 11 		Post Options Post Options   Thanks (0) Thanks(0)   Quote STANKYLEG Quote  Post ReplyReply Direct Link To This Post Posted: 08 Nov 2015 at 6:53am
Thanks everyone & to parsec especially.

the raid failed after some time.

I was getting around 20-40% higher scores in AS SSD with it in RAID 0 but didn't save a screen shot 

this is one of the drives - i really feel raid is way too unstable.   twice when it rebooted - the raid was unbootable.   i kind of just gave up.    maybe a bios update or two and it will be ok?

honestly at this speed with 1 drive it's fast and stable.   hope to hear back soon.   thanks for creating such a great motherboard.
Back to Top
parsec View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 04 May 2015
Location: USA
Status: Offline
Points: 4996 		Post Options Post Options   Thanks (0) Thanks(0)   Quote parsec Quote  Post ReplyReply Direct Link To This Post Posted: 08 Nov 2015 at 2:43pm
Thanks for that STANKYLEG!

I also found the RAID 0 array to be... delicate I'll call it. I have a feeling it is more of a problem with the IRST driver and IRST Option ROM, the latter being part of the UEFI/BIOS file.

I want to assure you that you are not doing anything wrong (or don't seem to be Cool ) that causes the RAID array to fail.

I've seen this happen myself, and the first RAID 0 users with our ASRock boards that I worked with had the same issue. We even discussed ways to recreate the RAID 0 arrays used as OS volumes, by having backups or another OS installation we could clone to the RAID 0 array. That's what I did the first time I used my RAID 0 array of SM951s, I cloned my Win 10 installation from a single SSD to the RAID 0 array. That worked fine and I ran Windows from the RAID 0 array until it failed after a UEFI clear, which I did as a test. Ouch

I've said this elsewhere; after a simple UEFI/BIOS clear, and starting the PC and immediately going into the UEFI, meaning Windows did not boot and only the POST process completed, was enough to cause the RAID 0 array to fail. After resetting all the UEFI options to the values required for a RAID 0 array to function, and restarting the PC from the UEFI "Save and Exit" and going directly back into the UEFI again (no OS boot, only POST) did not bring the RAID 0 array back to life.

I then let the PC boot into Windows, using another drive as the OS drive at that time when testing an empty RAID 0 array, and the RAID 0 array still had a status of failed, which is really no surprise.

If you've ever worked with SATA SSDs in RAID 0, you know you can clear the UEFI/BIOS, which sets the SATA mode to AHCI (the default), and go directly into the UEFI, reset the  SATA mode to RAID, restart the PC and go directly into the UEFI again, and you'll find the RAID 0 array is working fine. I've even moved a RAID 0 array of SSDs from one (Intel) board to another, and the RAID array still works. Actually, if you don't specifically delete the RAID array with SATA drives, you can't format them as a single drive in Windows. The RAID 0 metadata (data about the RAID array, which is stored on the drives in the array) remains intact on SATA SSDs. That does not seem to be the case with PCIe SSDs, which is just a theory of mine.

I really don't see this as being something ASRock can simply fix. IF it was a UEFI problem, IMO the programmers of the UEFI firmware, AMI in this case, would be the only one that could fix it.

Do you recall the events leading up to the failure of your RAID 0 array?
Back to Top
parsec View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 04 May 2015
Location: USA
Status: Offline
Points: 4996 		Post Options Post Options   Thanks (0) Thanks(0)   Quote parsec Quote  Post ReplyReply Direct Link To This Post Posted: 08 Nov 2015 at 3:00pm
Originally posted by Xaltar Xaltar wrote:

Damn that is quick. AS SSD is bugged for sure, as we discussed in my N3150M review. Over 50MB/s for 4k is Shocked!


Yes I remember that about AS SSD, producing odd results occasionally.  I forget if I mentioned that happens on laptop PCs sometimes too.

I agree over 50MB/s for 4K is wild, but that is one of the things NVMe is all about. NVMe somehow reduces the protocol overhead compared to AHCI on 4K random reads. Over 40MB/s 4K read speeds are rare for SATA SSDs.

The main thing I don't like about RAID 0 arrays is they always have reduced 4K read speeds compared to using a single drive of the same kind used in the RAID array. Booting an OS is many small file/4K random reads, the 2GB/s+ large file sequential read speed does not matter much in that case.

That is why many users would say they did not get faster boot times going from SATA II to SATA III SSDs. The large file read speed went from 250MB/s to 500MB/s, but unless the 4K random read speed increased significantly (which it didn't in to many instances), the boot time would not change.
Back to Top
 Post Reply Post Reply Page  <12
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.078 seconds.