![]() |
New build using Z270 Pro4, not booting |
Post Reply ![]() |
Page <12 |
Author | |
dimpole ![]() Newbie ![]() Joined: 18 Mar 2017 Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() |
Hey guys, I just did an outside the box build but no luck.
![]()
And... nothing. Could it be an issue with the Corsair Vengeance RAMs? I saw here that the newer BIOS version improves RAM compatibility, could it be that there have been issues with the older BIOS? The Corsair Vengeance is in ASRock's list of tested memories though but both memories I've tested were of the same brand. I tried finding a different RAM stick from other people but everyone I know either has older desktops that don't have DDR4 or laptops so no luck there either. Is it worth it spending 30+ more Euros to get a cheap 4GB stick to test it? Could the motherboard be simply bad? I ordered it online from a German site and it'll cost quite a bit to send it back so I want to be really sure before doing that. I'll try putting in the GPU again and try to connect through there using a DV-I cable I didn't have when I first plugged it in. I took some pictures of the plugged in motherboard, just so you can get an idea, although I doubt they'll help much. Edited by dimpole - 19 Mar 2017 at 12:01am |
|
![]() |
|
dimpole ![]() Newbie ![]() Joined: 18 Mar 2017 Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() |
![]() |
|
dimpole ![]() Newbie ![]() Joined: 18 Mar 2017 Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() |
Okay, so I am an idiot...
![]() ![]() Well... now I feel like a complete tool. Sorry for wasting everyone's time and thank you very much for your help! |
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
You didn't waste anyone's time. We all started out ourselves doing these same things.
My hats off to you. Your first build and it's working ! ![]() |
|
![]() |
|
Kurlakins ![]() Newbie ![]() Joined: 08 Jan 2018 Status: Offline Points: 1 |
![]() ![]() ![]() ![]() ![]() |
I ran into the same problem...starting it up everything started to run and not get anything on the screen. I tried the battery solution and that didn?™t work. However, I was about to try switching the ram cards into different slots when I notice that one of my ram cards wasn?™t completely in all the way. I had the clicker in but there was still a little portion not fully inserted. I mean it was so slight that I didn?™t even notice it when I went through my build again. I only noticed it when I was attempting to remove it. I would say it was like 98% inserted, so I pushed it fully in and wouldn?™t you know...I finally got the boot screen.
|
|
![]() |
|
CMorcom ![]() Newbie ![]() ![]() Joined: 27 Oct 2018 Location: Chicago Status: Offline Points: 1 |
![]() ![]() ![]() ![]() ![]() |
I'm having the same issue except I've tried the ram in a different system, a different power supply, different GPUs, no gpu, and I've check all my M.2 ports with and without a boot drive/ngff wifi chip. Any help please? (ASROCK Z270 PRO 4)
CPU: i7 6700K RAM: CORSAIR VENGEANCE RGB PRO PSU: EVGA 750W GOLD STANDARD I get no beeps, no POST, nothing... |
|
![]() |
Post Reply ![]() |
Page <12 |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |