b450 pro4 and bios 3.10 |
Post Reply | Page 12> |
Author | |
mir
Newbie Joined: 25 Mar 2019 Status: Offline Points: 16 |
Post Options
Thanks(0)
Posted: 25 Mar 2019 at 3:47am |
Hi Asrock,
I have just upgraded my bios to version 3.10 and found a number of bugs in this bios version: 1. When power on it takes 20-30 seconds before the OS starts to boot. 2. In bios the feature to upgrade bios via network and network configuration has vanished. 3. no post if 2 GPU's are present and monitors are connected to GPU in pcie2. If monitors are connected to GPU in pcie4 it will post but GPU in pcie2 is disabled. If only one GPU is present it will post regardless whether the GPU is attached to either pcie. |
|
Bebeth
Newbie Joined: 27 Mar 2019 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Hi! Got same problem.
Two graphics cards, only one post. And not the one in pcie2. Further research, card seems in d3 power state. Can't force it to d0 state. The other thing is, I cannot downgrade to previous version using instant flash with USB drive. File is found, show up on screen, but system says: invalid file. Any other way to fix it? |
|
Bebeth
Newbie Joined: 27 Mar 2019 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Addition to my previous post.
Computer seems to not shutdown completely too. CPU & GPU fan still running. Seems to take longer to post, I mean, after reboot, there's a longer delay before OS startup. And I checked the delay setting, still 1sec... |
|
mir
Newbie Joined: 25 Mar 2019 Status: Offline Points: 16 |
Post Options
Thanks(0)
|
I forgot to mention that about down-grading. I also tried going back to 1.80, which worked as expected, but was experiencing exact same thing as you.
Another thing I also forgot to mention is that on the page where the list of found drives are displayed the detailed text is written in Chinese . Maybe this version should have stayed inside the bios development department since it clearly wasn't properly tested before release to the public. |
|
Bebeth
Newbie Joined: 27 Mar 2019 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
+1 to send that update to beta stage.... But... After many setting toggling, reboot, reseting bios, removing battery... Got it working. It boot from primary GPU. Here's a list of setting that I changed : - SR-IOV Disabled - IOMMU Disabled - ACS ENABLED Disabled - SVM MODE Enabled - FAST BOOT Disabled - FULL SCREEN LOGO Disabled If you want to give a try, let me know your results. I'm interested. Some setting is for virtualization. Don't know if it applies to your setup, but I need them... Still on bios ver:3.10, I can't down-grading, but had listing is in English... PS: I may forget some setting, done a lot of change and reset.. |
|
paologab
Newbie Joined: 21 Nov 2018 Location: Milan Status: Offline Points: 112 |
Post Options
Thanks(0)
|
Hi
just for my knowledge, did you reset to deafult bios setting before the upgrade? thanks |
|
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
|
Bebeth
Newbie Joined: 27 Mar 2019 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
HI!
Actualy, no! Not the first time I flash it to 3.10. But with all the instability and boot lookup trying to change setting to make it work; I've reflash it to 3.10 (since that the only one I can flash), after I reset the bios by removing the battery. |
|
mir
Newbie Joined: 25 Mar 2019 Status: Offline Points: 16 |
Post Options
Thanks(1)
|
If you follow the instructions in [URL=http://forum.asrock.com/forum_posts.asp?TID=11230&title=b450-fatality-itx-bios-310-broken]this issue[/URL] by Am4_bored you can downgrade your bios to 1.80 which works flawlessly for me. Since I use Linux I had to make a Windows To Go usb stick which worked ;-)
|
|
paologab
Newbie Joined: 21 Nov 2018 Location: Milan Status: Offline Points: 112 |
Post Options
Thanks(0)
|
Hi mir me too I have linux and I'm seeking a way to upgrade graphic card bios... That is done via windows.
Could you share the image you used for your usb stick? |
|
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
|
mir
Newbie Joined: 25 Mar 2019 Status: Offline Points: 16 |
Post Options
Thanks(1)
|
Simply download a windows 10 version from here: https://www.microsoft.com/en-gb/software-download/windows10ISO
Pick the April 2018 download since the October 2018 download has a BSOD bug when booted from usb. For creating a windows to go usb simply use Rofus https://rufus.ie/ requires windows too so use virtualbox to create a VM using the iso downloaded from microsoft |
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |