SB Connect B450 gaming itx

Dear SteveD47,

Thanks for posting your query to ASRock forum.

Referring to your question about surround sound, please make sure that speakers are plugged to the 3.5mm jacks on rear panel.

If system has four speakers, please open the Cinema 5 then follow the steps below:
1. Go to "Settings" then press "Reset"
2. Click the "Speaker" on the left column then in the "Select Speakers" section please set 4.0.
(If system has less/more number of speakers please select correspond number of speakers in the "Select Speaker" section)
3. If it still will not work, kindly check if speakers are working properly.


With thanks,
ASRock TSD

Dear SteveD47,

Thanks for your confirmation.

Sound blaster connect can be supported with 3.5mm jacks.
We recommend you to connect audio device to 3.5mm jacks that supports Sound blaster connect.

With thanks,
ASRock TSD




Edited by ASRock_TSD - 03 Apr 2019 at 9:15pm

Audio over HDMI is the way to go or you wont get high definition sound as toslink doesnt have the band width to support it. Your home cinema amp should be decoding the raw signal over hdmi and applying any effects to the output. Make sure you use passthrough on audio settings if using Kodi or home cinema media player etc.

I agree with audio over HDMI, but not in this case. I use audio over HDMI in my stereo, it will support 5 channel Flac, 7.1 Dolby Atmos/DTS X and most any other HD sound. For my SACD/DVDA/Bluray audio I use a seperate HDMI for audio and video. With the commputer, I'll use Toslink......This motherboard audio is only stereo and nowhere close to being able to run 5 channel Flac. To run HDMI on a computer you would have to run it through a video card, who wants to run audio through a board with 2 fan motors on it? I haven't found a video card a with Sabre ESS on it. I tried running audio through the mobo HDMI....Nothing couldn't find anything in device manager for sending the signal through the HDMI port. If you have any suggestions I'm all ears! Thanks