ASRock Z390 Taichi Ultimate wont post

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have been trying everything for the last few hours on getting my ASRock Z390 Taichi Ultimate to post but to no avail. It a completely new build but I keep running into the same problem. I have reset the cmos, changed out the ram im using, (im only using 1 stick in the first slot until I can get it stable). Removed the video card, reinstalled the cpu, plugged everything on and back in. Im just not sure what mistake im making. I also cant get the machine's speaker to work so im going off the led post codes. 

When I turn the machine on it goes to 27 then back down to 10 where it stays. Everything has power but it just sits at 10. 

Parts are as follows 

ASRock Z390 Taichi Ultimate LGA 1151

CORSAIR Vengeance LPX 64GB (2 x 32GB) 288-Pin DDR4 SDRAM DDR4 2666 (PC4 21300) Desktop Memory Model CMK64GX4M2A2666C16

Intel Core i7-9700K Coffee Lake 8-Core 3.6 GHz (4.9 GHz Turbo) LGA 1151

1000w power supply. Like I said I havent even gotten the onboard graphics to work so I dont think the cards matter at the moment. 

Any help would be appreciated !

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
calaber24p Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Sep 2019 Status: Offline Points: 3	Post Options Post Reply Quote calaber24p Report Post Thanks(0) Quote Reply Topic: ASRock Z390 Taichi Ultimate wont post Posted: 29 Sep 2019 at 7:49am
	I have been trying everything for the last few hours on getting my ASRock Z390 Taichi Ultimate to post but to no avail. It a completely new build but I keep running into the same problem. I have reset the cmos, changed out the ram im using, (im only using 1 stick in the first slot until I can get it stable). Removed the video card, reinstalled the cpu, plugged everything on and back in. Im just not sure what mistake im making. I also cant get the machine's speaker to work so im going off the led post codes. When I turn the machine on it goes to 27 then back down to 10 where it stays. Everything has power but it just sits at 10. Parts are as follows ASRock Z390 Taichi Ultimate LGA 1151 CORSAIR Vengeance LPX 64GB (2 x 32GB) 288-Pin DDR4 SDRAM DDR4 2666 (PC4 21300) Desktop Memory Model CMK64GX4M2A2666C16 Intel Core i7-9700K Coffee Lake 8-Core 3.6 GHz (4.9 GHz Turbo) LGA 1151 1000w power supply. Like I said I havent even gotten the onboard graphics to work so I dont think the cards matter at the moment. Any help would be appreciated !

RLGL Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 29 Jul 2018 Location: MN Status: Offline Points: 2025	Post Options Post Reply Quote RLGL Report Post Thanks(0) Quote Reply Posted: 29 Sep 2019 at 11:22pm
	Do you have both atx power connectors in place? See page 8 in your manual items 1 and 2.
	Asrock Z370 Gaming K6,Intel i7 8700K, Asrock x570 Taichi