B550 Steel Legend BSOD Installing Windows |
Post Reply |
Author | |
kurtz
Newbie Joined: 22 Sep 2020 Status: Offline Points: 7 |
Post Options
Thanks(0)
Posted: 23 Sep 2020 at 6:38am |
Hi,
New build, trying to install windows 10 from USB, also tried from SSD, immediate BSOD before windows installer can get started and display anything. Usually CRITICAL_PROCESS_DIED or SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Also tried Fedora Linux, which did install but falls into safe mode due to the following errors.... smp: Bringing up secondary CPUs... x86: Booting SMP configuration: do_IRQ: 1.55 No irq handler for vector do_IRQ: 2.55 No irq handler for vector do_IRQ: 3.55 No irq handler for vector do_IRQ: 4.55 No irq handler for vector do_IRQ: 5.55 No irq handler for vector do_IRQ: 6.55 No irq handler for vector do_IRQ: 7.55 No irq handler for vector do_IRQ: 8.55 No irq handler for vector do_IRQ: 9.55 No irq handler for vector do_IRQ: 10.55 No irq handler for vector I've swapped motherboard, ram, graphics card. CPU is the last remaining component not swapped. Is this really a CPU issue? I've poked around the BIOS but unsure what to change if anything. Using most recent BIOS for board. Google searching did not help. Any hints would be welcome. System config... ASRock B550 Steel Legends Motherboard AMD Ryzen 5 3600 CPU Geforce GTX 1660 Super G.SKILL Trident Z Neo (2 x 16GB) DDR4 3600 (F4-3600C18D-32GTZN) also tried CORSAIR - Vengeance LPX 32GB (2PK x 16GB) 3.2 GHz DDR4 (CMK32GX4M2B3200C16) Thanks! --Kurt |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
what BIOS are you running?
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
kurtz
Newbie Joined: 22 Sep 2020 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Running latest bios 1.20
I attempted separate Ubuntu installs this morning with the two brands of memory I have: G.Skills and Corsair. Both installs failed with hardware asserts related to memory corruption.... mce: Uncorrectable hardware memory error in user-access at 7c52a8580 mce: [Hardware Error]: Machine check events logged Memory failure: 0x7c52a8: Sending SIGBUS to Xorg:4045 due to hardware memory corruption Memory failure: 0x7c52a8: Sending SIGBUS to y2start:4110 due to hardware memory corruption Memory failure: 0x7c52a8: recovery action for dirty LRU page: Recovered I've run memtest86 on the G.Skills set with no errors. I find it hard to believe I have two bad sets of brand new memory, and considering I swapped all components except the CPU, still leaning toward a CPU problem. I'm waiting on feedback from AMD. The memory corruption messages above occur at the same spot in the log with signals sent to Xorg and y2start. I assume yast is configuring something. I do see ISO 9660 Extensions messages before these errors and also some RAID related messages. I don't have any RAID configured. More confusion. |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
could be faulty memory controller on the CPU. Swapping stuff around, I'm sure you've already checked the pins on the CPU for and defects
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
kurtz
Newbie Joined: 22 Sep 2020 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Thanks for the help. AMD has replied to my service request and I've provided them with additional supporting documentation. I'll update the thread when I hear back from them.
|
|
kurtz
Newbie Joined: 22 Sep 2020 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
AMD is sending me a replacement CPU. Will update thread when I'm able to test the new one.
|
|
kurtz
Newbie Joined: 22 Sep 2020 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Turned out to be the CPU. Replacement works fine. Thanks for the help!
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |