H81TM-ITX R2.0 VGA card |
Post Reply |
Author | |
aquelito
Newbie Joined: 26 Jan 2016 Status: Offline Points: 15 |
Post Options
Thanks(0)
Posted: 26 Jan 2016 at 6:09pm |
Hello there,
I would like to purchase this mobo as it features a dc-in jack. http://www.asrock.com/mb/Intel/H81TM-ITX%20R2.0/ However, I would like to install a Celeron G1820 and add a discrete GPU, let's say this R7 240 : http://www.amazon.fr/Asus-R7240-SL-2GD3-L-Carte-graphique-Express/dp/B00J0SATEA/ref=sr_1_1?ie=UTF8&qid=1453730503&sr=8-1&keywords=r7+240+passive Two questions : - Can I fit the card straight into the PCIe x 4 slot or do I have to use that kind of riser ? http://eshop.sintech.cn/flexible-pci-express-x4-to-x16-riser-card-p-608.html - Would the DC-IN jack be able to power the R7 240 + the Celeron G1820 ? Let's assume my power brick is certified for 130 W. Thanks a lot for your answers, will determine if I choose this board !
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Online Points: 25073 |
Post Options
Thanks(0)
|
The PCIe x4 half slot is open ended so the card should be able to install directly into it. As for power requirements the R7 240 and celeron G1820 should be able to run on a 130w power brick but as I have not built a system on that board or any like it I cannot say with absolute certainty. It will also depend on what additional peripherals/fans will be installed in the system.
|
|
aquelito
Newbie Joined: 26 Jan 2016 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Hi Xaltar,
Thank you very much for your quick answer. Regarding the power supply, my question was whether a DC-IN onboard jack could run at all that kind of system, regardless the wattage of the power brick. A member of an other forum sugested that a PICO-PSU would be mandatory, a simple DC-IN jack could not handle such a system (G1820, R7 240, 3 x 92 mm rads, one SSD).
|
|
parsec
Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
|
The specs say this board can be used with up to 65W TDP processors. The Celeron G1820 is a 53W TDP processor.
The specs for this board also include this about the DC power supply: Please use a 19V power adapter for the DC jack. his jack accepts dual barrel plugs with an inner diameter of 5.1 mm and an outer diameter of 7.4 mm, where the inner contact is +19 (±10%) VDC and the shell is GND. The user manual lists three compatible power supplies, each of 150W capacity. A video card drawing power only from the PCIe slot, that supplies 75W maximum, would be the greatest single load on the PSU. A review of an R7 240 I found, used with a standard Z77 chipset board and an over clocked i5-2550K, showed the maximum power usage of the system as 122W. Given this information, you might be able to get by with a 150W PSU, but I would not use less than that. How you would supply power to your "3 x 92mm rads", and pump (I assume), I don't know. Your question about, "... regardless the wattage of the power brick.", will depend greatly upon the capacity of the power brick. That is the main variable that cannot be overlooked IMO. |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Also keep in mind that R7 240 will operate at/in x4, as it is an x4 slot it will be going into.
ie: if you plan on gaming with the mid-row titles it may be a sloth. Edited by wardog - 27 Jan 2016 at 12:24am |
|
aquelito
Newbie Joined: 26 Jan 2016 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Yep, too bad the H81 board has not the same specs as the AM1H-ITX (full PCIE, DIMM slots).
Why is there such differences ? Anyway, thanks for your answers. I think I am going to go for an other board, with a standard PicoPSU unit. Safer this way :)
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |