No Post |
Post Reply |
Author | |
Akaandu
Newbie Joined: 22 Feb 2022 Status: Offline Points: 20 |
Post Options
Thanks(0)
Posted: 22 Feb 2022 at 6:47am |
T have asked the same question on the AMD Forums (Here), and have tried everything that was suggested there. The problem continues to persist, and if I can't get a solution here, I'll try to RMA my board and get a replacement.
I've been having a problem with my build not posting, the system powers on and then does nothing indefinitely. DRAM and CPU debug LEDs are on and solid, and I've replaced everything in my system one at a time, starting with: ASUS A320M-K 16Gb DDR4 3000MHz Ryzen 5 3600 600W 80+ Gold PSU 256Gb Neo Forza 2.5" SATA SSD 1Tb WD Blue HDD 7200 RPM RX 580 8Gb Unbranded M.2 Wi-fi Card And I now currently run: Asrock B550M pro4 32Gb DDR4 3000 MHz (Added another set to the original) Ryzen 7 3700X 750W 80+ Bronze PSU 256Gb Neo Forza 2.5" SATA SSD 1Tb WD Blue HDD 7200 RPM Samsung EVO 970+ 1Tb RTX 2060 OC Edition 6Gb RX 580 8Gb Unbranded M.2 Wi-Fi Card The issue is as follows: When I turn on the system, either by pressing the power or jumping the pins, the fans start spinning on both the chassis and the GPU. I've tried this on both motherboards, using both CPUs, and I tried all combinations of RAM I could possibly do, on both boards. Still refuses to post, no signal detected by monitor. I have called a technician, and he claims that its the CPU that's the problem, and that's where the 3700X came from. This is basically an entirely new system now, so I am very confused and irritated that it does not want to work. I bought the CPU second-hand, and returns are not possible if it happens to be the problem Warranty on the prebuilt (Found here) is not within warranty anymore. Everything else either did not come with a protection plan, or it is expired. Its been months for me trying to fix this and I am losing my sanity, anything I have not tried would be welcome. What I have tried is: Resetting CMOS Using different display out methods, (HDMI, DisplayPort, DVI-D, none work) Trying no less than 3 different power supplies (1000W, 750W, and 600W) Using 2 different motherboards Using 2 different GPUs Using 2 different CPUs Taking everything out and only leaving necessary components connected (No RGB, no storage drives, no fans, only RAM, CPU, and GPU) Trying all 24 combinations of RAM in all the DIMM slots (16 on the B550, 8 on the A320) |
|
threadzipper1957
Senior Member Joined: 05 Mar 2022 Status: Offline Points: 9365 |
Post Options
Thanks(0)
|
Dear Akaandu,
What happens when you use only the board, 1 memory module in A2, the graphics card, and of course a CPU, and connect both power cables to the ATX connector and the 12V CPU power, and test the board outside the chassis on top og the cardboard box, with a wired USB keybaord and mouse, and of course a monitor, also remove the M.2 cards. Give the board some time to boot, and iot should run into BIOS. Or use trhe support form https://event.asrock.com/tsd.asp?ln=en When using a gmail account please check your spam folder |
|
Kind Regards
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |