Install windows 7 on 960 evo |
Post Reply | Page 12> |
Author | |
nick80gr
Newbie Joined: 17 Jan 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
Posted: 17 Jan 2017 at 2:31am |
Hi, i have a H170 perfomance motherboard and a m2 ssd 960 evo samsung. I try to install windows 7 64 bit but i can't make it. I see the disk on bios but in the step that need to choose the disk in order to install windows i can't find it. What need to do in order to fix it ? Need to install a driver ?
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
nick80gr
Newbie Joined: 17 Jan 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
I have follow all these steps but still i can't find what i miss. I have also one 850 evo, when i connect both disk in the phase that need to choose disk to install windows I can see only the 850 evo.
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
parsec
Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
|
Yes, you must install an NVMe driver. The 960 EVO is an NVMe SSD, a new and different storage protocol than SATA. Windows 7 does not have a built in NMVe driver in its installation program, which is why the 960 EVO is not found. Samsung provides an NVMe driver on the information page of the 960 EVO. But it is not in the correct format for use with a Windows installation. The NVMe driver files have been extracted from the Samsung NVMe driver installation program, which normally can only be used once Windows is installed. There is a link to a website where you can download that driver at the end of this post. You are trying to do two difficult things at the same time, difficult because you are using Windows 7. Windows 8.1 and 10 do not have these problems. First there is the problem with no USB 3.0 driver, and second no NVMe driver. Below is a link to a guide for installing Windows 7 on an Intel 100 series chipset board (like you have), using an NVMe SSD as the Windows drive. If you need to use this guide, you must be careful to do every step perfectly. The link to the NVMe driver you can load during the Windows 7 installation is in the guide: http://forum.notebookreview.com/threads/guide-installing-windows-7-on-an-nvme-ssd-from-a-usb-3-0-thumbdrive.783921/ A direct link to a Samsung NVMe driver you can use with a Windows 7 installation can be found on the page below. Find the Samsung NVMe Drivers section, you want the Win 7 "pure" 64 bit driver: http://www.win-raid.com/t29f25-Recommended-AHCI-RAID-and-NVMe-Drivers.html |
|
menolly
Newbie Joined: 13 Apr 2017 Location: Dublin Status: Offline Points: 2 |
Post Options
Thanks(0)
|
There is one simple solution for your problem.
Download Win 7 Tool from Gigabyte website: and then follow my steps on YouTube video how to prepare Win 7 USB with NVM drivers for EVO SSD Edited by menolly - 13 Apr 2017 at 10:59pm |
|
stefan33
Newbie Joined: 08 Apr 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
|
I tell you what relly you have to do: You need A Windows 7 ISO (DVD or Virtual Image mounted for example on Alcohol 120). Then go to Gigabyte web site and download: GIGABYTE 100 Series Windows 7 USB Installation Tool: https://www.youtube.com/watch?v=ufsczv8cIeM Than (very important before unrar the software REMOVE the block)... execute it. Remember to add usb and nvme drivers to the original Win 7 iso Than create USB Bootable stick.... Nothing more. Everything is working. If you like later insatall Samsung nvme drivers. |
|
menolly
Newbie Joined: 13 Apr 2017 Location: Dublin Status: Offline Points: 2 |
Post Options
Thanks(0)
|
Alreay replied.
|
|
stefan33
Newbie Joined: 08 Apr 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
|
I see now you wrote it the same over... :-)
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |