New SSD causes BSOD £

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   ASRock B450 Pro4
AMD Ryzen 5 3600
AMD Radeon RX 580
32GB DDR4 SDRAM 3200MHz
Windows 11

I have a Kingston SA2000M8/250G M.2 NVME SSD in M.2_1 (Windows drive) and a ADATA SX6000PNP 256GB in M.2_2. Both of these work fine. I tried to upgrade the latter using a TeamGroup TM8FP6512G0C101 512GB SSD, but in M.2_2 it generates a BSOD almost as soon as I reach the desktop after booting. If I put this in M.2_1 (making it the Windows boot drive) it works fine - no BSOD.

Any ideas why this might be the case?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
UncleZip Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 15 May 2021 Location: UK Status: Offline Points: 75	Post Options Post Reply Quote UncleZip Report Post Thanks(0) Quote Reply Topic: New SSD causes BSOD £ Posted: 04 Sep 2024 at 4:30pm
	ASRock B450 Pro4 AMD Ryzen 5 3600 AMD Radeon RX 580 32GB DDR4 SDRAM 3200MHz Windows 11 I have a Kingston SA2000M8/250G M.2 NVME SSD in M.2_1 (Windows drive) and a ADATA SX6000PNP 256GB in M.2_2. Both of these work fine. I tried to upgrade the latter using a TeamGroup TM8FP6512G0C101 512GB SSD, but in M.2_2 it generates a BSOD almost as soon as I reach the desktop after booting. If I put this in M.2_1 (making it the Windows boot drive) it works fine - no BSOD. Any ideas why this might be the case?

eccential Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 10 Oct 2022 Location: Nevada Status: Offline Points: 5095	Post Options Post Reply Quote eccential Report Post Thanks(0) Quote Reply Posted: 04 Sep 2024 at 11:31pm
	Pure guess here, given limited information. - 1 x Ultra M.2 Socket (M2_1), supports M Key type 2242/2260/2280 M.2 PCI Express module up to Gen3 x4 (32 Gb/s) (with Matisse) - 1 x M.2 Socket (M2_2), supports M Key type 2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x2 (16 Gb/s) If M2_1 is occupied, PCIE4 will be disabled. So the 2nd M2 socket will only supply 2 PCIe lanes. This shouldn't pose any problems normally, other than max transfer speed becoming halved, maybe some NVMe SSDs don't meet PCIe specs and won't work properly with just 2 lanes. SX6000PNP apparently worked fine, but maybe TM8FP6512G0C101 doesn't. Can't think of anything else.