VDDCR_SOC

Hope someone can chime in on this because I have the same question. Though I can kind of guess from the name. I am not certain if I am right but I would guess that VDDR_SOC is the one you want to adjust and the VDDR_SOC_S5 has something to do with power management state S5 which probably means the power supplied to the SOC while in S5 off mode.

keep us updated

alas with the tr platform its very much early adopters that find out what worksd and what is needed to tweak

LurkerLito wrote: It didn't work out for me. I couldn't get it working and it was annoying as it rebooted the machine 3x (fails) by powering the machine down then up again before it set itself back to default 2133. Since I have 11 HDD in my system I wasn't going to do any more testing so I put it back to my normal stable settings. Maybe one day I'll disconnect all the HDD and try it again but I just don't want to spend the time anymore to try and get 3200 running.

Heya I was able to get my 2933@cl14 flare X up to 3200@cl16 but I had to tweak some of the settings recommended by the Ryzen calc. The setting that has the rzq/7 stuff I had to change from the calc recommended back to auto to get it to post otherwise it would do that boot training restart three times then post at 2133 safe default. Also had to change the procodt from the recommended 43.6 to 50 ohms then everything worked. Tested the OC memory with HCI memtest pro to 500 percent coverage no errors also stability tested with prime 95 blend and aida64 extreme stability test overnight. Once I receive my RAM cooling fans Ill try mo OC cause RAM starts producing errors once 50c+