ASRock Z690 Extreme DDR4 - dram issue

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I had a lot of trouble with a similar set DDR4 3600 CL 18 @ 1.35v. I was able to get it to run at 3200 though.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
kellyprankin Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 04 Jan 2022 Status: Offline Points: 15	Post Options Post Reply Quote kellyprankin Report Post Thanks(0) Quote Reply Posted: 04 Jan 2022 at 12:38pm
	I had a lot of trouble with a similar set DDR4 3600 CL 18 @ 1.35v. I was able to get it to run at 3200 though.

RocketRunner442 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 01 Jan 2022 Status: Offline Points: 50	Post Options Post Reply Quote RocketRunner442 Report Post Thanks(0) Quote Reply Posted: 01 Jan 2022 at 10:45pm
	I recently purchased a ASRock Z690 Extreme DDR4 Intel LGA 1700 motherboard for my new build. Other components are: Intel Core i7-12700K 3.6 GHz 12-Core Processor NZXT Z73 cooler DOMINATOR® PLATINUM RGB 32GB 3600 CL18 (2 x 16GB) (CMT32GX4M2Z3600C18) M2 nvme 1TB HD (blank) Before adding my GPU and hard drives, I wanted to make sure my case fans and other basic case related hook ups were properly connected. When I boot the computer, everything seems to power on as expected; RGB on the MB, RAM, fans, and cooler turn on as expected. However, the DRAM LED on the MB stays on constantly and I do not get any signal outputted from either the HDMI and DP ports. I tried the RAM in slot 2 & 4. Tried single ram, tried a spare 4GB ram stick and had same results. I also put the Corsair ram in another MB and was able to see it in that bios. Am I running into a compatibility issue or is there something potentially wrong with my motherboard? Thanks in advance!