x399 Taichi RAID issue

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Mobo: Asrock  x399 Tr4 (P2.00 BIOS)
CPU: AMD threadripper 1900x
RAM: G.Skill 3200 DDR4  4x16gb 
Storage: 
1x Samsung 960 EVO 250GB NVEM
2x2GB Toshiba SATA HDD drives
1x500GB SATA HDD
Optical drive: One DVD-RW optical drive

This is my first build with an AMD processor (always built Intel rigs).  I am trying to setup a RAID and running into a lot of issues.  Upgraded the board to Bios 2.00 and running on the default bios configuration - no OC.

M.2 port: 250GB Samsung EVO 
SATA Port#1: 1x2TB SATA HDD 
SATA Port#2: 1x2TB SATA HDD
SATA Port#3: 500GB SATA HDD (with Windows 7 pulled from another PC and needs another thread to deal with the windows 7 issues on Tachi x399)
SATA Port#4: DVD drive

I first installed Windows 10 on the M.2 and can see all the drives in windows.  I just want to keep the 2TB disks for storage (no OS) so I only selected disks on port 1 and 2 for RAID 1 by following the AMD raid setup instructions. 

When I booted into Windows 10, it can't see the RAID1 volume and 500GB hdd.  The DVD drive is missing as well.  The device manager has the exclamation overlay icon on the storage controller which I think is due to windows not have the RAID controller drivers.  I tried the drivers from Asus but no avail.  Windows driver update kept saying it can't install the driver.  

I am guessing if I manage to install the right RAID driver, all the SATA drives including the DVD drive should show up in windows.  Any suggestions?

Thanks

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
rocker7617 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 20 Jan 2018 Status: Offline Points: 55	Post Options Post Reply Quote rocker7617 Report Post Thanks(0) Quote Reply Posted: 05 Feb 2018 at 12:41pm
	Mobo: Asrock x399 Tr4 (P2.00 BIOS) CPU: AMD threadripper 1900x RAM: G.Skill 3200 DDR4 4x16gb Storage: 1x Samsung 960 EVO 250GB NVEM 2x2GB Toshiba SATA HDD drives 1x500GB SATA HDD Optical drive: One DVD-RW optical drive This is my first build with an AMD processor (always built Intel rigs). I am trying to setup a RAID and running into a lot of issues. Upgraded the board to Bios 2.00 and running on the default bios configuration - no OC. M.2 port: 250GB Samsung EVO SATA Port#1: 1x2TB SATA HDD SATA Port#2: 1x2TB SATA HDD SATA Port#3: 500GB SATA HDD (with Windows 7 pulled from another PC and needs another thread to deal with the windows 7 issues on Tachi x399) SATA Port#4: DVD drive I first installed Windows 10 on the M.2 and can see all the drives in windows. I just want to keep the 2TB disks for storage (no OS) so I only selected disks on port 1 and 2 for RAID 1 by following the AMD raid setup instructions. When I booted into Windows 10, it can't see the RAID1 volume and 500GB hdd. The DVD drive is missing as well. The device manager has the exclamation overlay icon on the storage controller which I think is due to windows not have the RAID controller drivers. I tried the drivers from Asus but no avail. Windows driver update kept saying it can't install the driver. I am guessing if I manage to install the right RAID driver, all the SATA drives including the DVD drive should show up in windows. Any suggestions? Thanks