X399 Taichi High VRM Temps

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

I can say no that is not normal. Highest I see @4GHz 1.35v on P95 is 55C for the VRM. I took CB R15 and for 30 minutes bashed the CPU and max VRM was 45C.  
At 1.35v P95 set to just small FTT crashed so I set to 1.375. After 15 minutes this was the result;

Edited by TANWare - 12 Mar 2018 at 7:44am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
TANWare Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 24 Sep 2017 Status: Offline Points: 120	Post Options Post Reply Quote TANWare Report Post Thanks(0) Quote Reply Posted: 12 Mar 2018 at 6:58am
	I can say no that is not normal. Highest I see @4GHz 1.35v on P95 is 55C for the VRM. I took CB R15 and for 30 minutes bashed the CPU and max VRM was 45C. At 1.35v P95 set to just small FTT crashed so I set to 1.375. After 15 minutes this was the result; Edited by TANWare - 12 Mar 2018 at 7:44am
	x399 Taichi, 1950x, 32GB 3466 DDR4 2x500GB 960EVO,Asus 1080TI Passmark

Tbonephile Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 12 Mar 2018 Location: Boston Status: Offline Points: 7	Post Options Post Reply Quote Tbonephile Report Post Thanks(0) Quote Reply Posted: 12 Mar 2018 at 6:09am
	I have a X399 Taichi running a 1950x Threadripper at 1.375v at 4ghz, LLC is at level 3 SOC is at 1.05 and when I run Prime 95 Blender I hit 109c when it does small 8K FFT test and around 86c for the rest of the test. My CPUs Tdie are around 60c and do not exceed 80c for the small FFT test but my VRMs are super toasty. Is this normal? What are the limits of the VRM? I am running in a Corsair 540 with a Enermax Liqtech 360 infront as intake and ambient temperature is around 20c.