ASROCK b450m PRO4 + G.Skill aegis DDR4-3000

Hello everybody,

I have bought one motherboard ASRock B450M PRO4 with 2*8 GB memory ddr4-3000 G.skill aegis.

the issue is bios not see the dual channel mode and see only single channel mode and BIOS see too my memory, instead DDR4-3000, DDR4-2133 and OS use "reserved hardware memory" 8.1 GB.

now I try everything on the internet, I have tried too to change the memory slot (a1b1 a2b2) but nothing.

could you help me to fix this issue?

kind regards

MKnerd

Hello,

thanks for reply the QVL is Qualified Vendor List, this mean ASrock have try this DDR4 with this motherboard but this not mean only the memory in the QVL are supported and other one, not in the list, are not compatible. Words of ASrock.

i have already update the bios.

if anyone have another suggestion this would appreciated

thanks again

I have seen a lot of users reporting issues using Aegis RAM on AM4 (Ryzen) boards, both here and on other forums. G.Skill does not include a single AM4 board in their QVL for any of the Aegis series. Aegis is designed for intel systems. I often see people trying to use it on Ryzen systems because it is frequently the cheapest DDR4 RAM available. Your issues are common among users attempting to use this particular RAM kit, no Dual channel and the "system reserved" issue in windows. I suspect it is something to do with the RAM's firmware. So far I have not seen anyone find a workaround or solution other than returning the RAM and getting a different model (not Aegis).

For Ryzen G.Skill has the Fortis and Flair X ranges. Sorry to be the bearer of bad news.

Edited by Xaltar - 28 Mar 2019 at 5:02am

Xaltar wrote: I have seen a lot of users reporting issues using Aegis RAM on AM4 (Ryzen) boards, both here and on other forums. G.Skill does not include a single AM4 board in their QVL for any of the Aegis series. Aegis is designed for intel systems. I often see people trying to use it on Ryzen systems because it is frequently the cheapest DDR4 RAM available. Your issues are common among users attempting to use this particular RAM kit, no Dual channel and the "system reserved" issue in windows. I suspect it is something to do with the RAM's firmware. So far I have not seen anyone find a workaround or solution other than returning the RAM and getting a different model (not Aegis). For Ryzen G.Skill has the Fortis and Flair X ranges. Sorry to be the bearer of bad news.

i think that too i already write to seller and wait for one reply.

but one things i ca't explain to myself is why if i put only one memory the "hardware reserved memory" is on 64 MB and if i put 2 memory this grow to 8.1gb?

if anyone can explain this or maybe have a sollutions (i read online of corrupter SDP but i check with cpu-z and i think my SDP are not corrupted)

kindly

That was pretty stupid. As the ram perfectly works i have the same. You have not run in dual mode slot b2 a2 and thats why. The previous ram works flawless instantly at xmp on 3133mhz no changes. Can even oc 3000 on a 14cl. All tvis qvl nonsense people i mean cmon....??? Sadly you bought new ram as the cheap kit f4-3000c16d-16gisb if im not mistaking out of my head,... The aegis gskill 3000mhz 16cl one u had is a very good budget kit and works perfectly on the pro4 matx.