B650E steel legend 3.50 post issues

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   My one year old build consisting of a B650E steel legend Ryzen 7 7700x, ASUS ASUS 4070 super, and g.skill Trident Z5 Neo RGB 64go (32x2) 6000 C30 ram is giving me problems posting. In the year since I?�ve built the machine it?�s always been finicky to start but once running I?�ve not experienced any issues. I just upgraded the bios to 3.5 and during the upgrade I noticed the default ram mts was 4800 and not 6000, I changed it to 6000 and switched to expo and the problem has become much worse, the computer is almost unusable. When booting, Sometimes ill get a steady cpu light and flashing dram light sometimes no lights and sometimes just the CPU led is lit. When it doesn?�t post which is almost every time now, I unplug the psu and press the cmos clear button for 30 seconds. the clear cmos doesn?�t seem to help unless I let the computer sit for 30 min or more. My last attempt took 2 hours 2 reboot. I?�ve read of several issues with g.skill ddr5and asrock boards. Is there any fix or recommended settings I can enable to make this thing work? On the old bios I never tinkered with the bios ram settings and they were likely at the default of 4800 and that kept the build somewhat stable, but I?�d like to get the full capacity of the components I purchased. I?�m an occasional mild gamer, the bulk of what I use the computer for is photo editing using Photoshop, Lightroom, and a little video editing using Davinci. Im hoping I don?�t have to change out a 700.00 set of ram. Would I be better off writing off the mother board and getting something or am I missing something in the bios that will let me run everything at or close to its capacity? if a new MB is the best route what would you recommend?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
USMA36 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 11 hours 15 minutes ago Location: Poconos Status: Offline Points: 15	Post Options Post Reply Quote USMA36 Report Post Thanks(0) Quote Reply Topic: B650E steel legend 3.50 post issues Posted: 10 hours 38 minutes ago at 4:19am
	My one year old build consisting of a B650E steel legend Ryzen 7 7700x, ASUS ASUS 4070 super, and g.skill Trident Z5 Neo RGB 64go (32x2) 6000 C30 ram is giving me problems posting. In the year since I?�ve built the machine it?�s always been finicky to start but once running I?�ve not experienced any issues. I just upgraded the bios to 3.5 and during the upgrade I noticed the default ram mts was 4800 and not 6000, I changed it to 6000 and switched to expo and the problem has become much worse, the computer is almost unusable. When booting, Sometimes ill get a steady cpu light and flashing dram light sometimes no lights and sometimes just the CPU led is lit. When it doesn?�t post which is almost every time now, I unplug the psu and press the cmos clear button for 30 seconds. the clear cmos doesn?�t seem to help unless I let the computer sit for 30 min or more. My last attempt took 2 hours 2 reboot. I?�ve read of several issues with g.skill ddr5and asrock boards. Is there any fix or recommended settings I can enable to make this thing work? On the old bios I never tinkered with the bios ram settings and they were likely at the default of 4800 and that kept the build somewhat stable, but I?�d like to get the full capacity of the components I purchased. I?�m an occasional mild gamer, the bulk of what I use the computer for is photo editing using Photoshop, Lightroom, and a little video editing using Davinci. Im hoping I don?�t have to change out a 700.00 set of ram. Would I be better off writing off the mother board and getting something or am I missing something in the bios that will let me run everything at or close to its capacity? if a new MB is the best route what would you recommend?