H170M Pro4 - NVMe conflict with HDMI

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi,

I have a similar problem with the ASRock X570 PRO4 and the Transcend TS512GMTE220S M.2 drive.

System: Windows 10 PRO (10.0.18362 Build 18362)

Board: ASRock X570 PRO4, BIOS: P 1.30, SMBIOS: 3.2
Prozessor: Ryzen 5 Matisse 3600
RAM: 2x 8 GB G.Skill F4-3000C16S-8GISB
Graphic_1: Nvidia GeForce GTX 1660 TI Asus Phoenix 6 GB
Graphic_2: Nvidia GeForce GTX 750 TI
Graphic Driver: 26.21.14.4108

Harddrives:
c: HDD 250 GB 3,5"
H: external HDD 1 TB 2,5"
I: 100 MB System reserved
J: HDD 150 GB 3,5"

When i install the Transcend PCIe SSD 512 GB drive into the primary M.2 Slot the PC won`t start.

Post status checker (PSC, the red onboard indicator led-lights) shows: Graphics fail and HDD fail.

Without installed Transcend PCIe SSD 512 GB drive the computer start normal and without any error messages.

Maybe there is a conflict between the PCIe-channel the M.2 SSD drive uses and the PCIe-channel the graphic card ist using.
Or is there a special setting in the UEFI-BIOS necessary to use the Transcend TS512GMTE220S?

Thanks for help,
best regards
Ralf

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Ralf Hofmann Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 Nov 2019 Location: Germany Status: Offline Points: 1	Post Options Post Reply Quote Ralf Hofmann Report Post Thanks(0) Quote Reply Topic: H170M Pro4 - NVMe conflict with HDMI Posted: 10 Nov 2019 at 12:58am
	Hi, I have a similar problem with the ASRock X570 PRO4 and the Transcend TS512GMTE220S M.2 drive. System: Windows 10 PRO (10.0.18362 Build 18362) Board: ASRock X570 PRO4, BIOS: P 1.30, SMBIOS: 3.2 Prozessor: Ryzen 5 Matisse 3600 RAM: 2x 8 GB G.Skill F4-3000C16S-8GISB Graphic_1: Nvidia GeForce GTX 1660 TI Asus Phoenix 6 GB Graphic_2: Nvidia GeForce GTX 750 TI Graphic Driver: 26.21.14.4108 Harddrives: c: HDD 250 GB 3,5" H: external HDD 1 TB 2,5" I: 100 MB System reserved J: HDD 150 GB 3,5" When i install the Transcend PCIe SSD 512 GB drive into the primary M.2 Slot the PC won`t start. Post status checker (PSC, the red onboard indicator led-lights) shows: Graphics fail and HDD fail. Without installed Transcend PCIe SSD 512 GB drive the computer start normal and without any error messages. Maybe there is a conflict between the PCIe-channel the M.2 SSD drive uses and the PCIe-channel the graphic card ist using. Or is there a special setting in the UEFI-BIOS necessary to use the Transcend TS512GMTE220S? Thanks for help, best regards Ralf

45harry Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 15 May 2019 Status: Offline Points: 3	Post Options Post Reply Quote 45harry Report Post Thanks(0) Quote Reply Posted: 15 May 2019 at 4:14pm
	Ascrock H170M Pro4 v7.20 bios cpu i7-6700 disk TS512GMTE220S - PCIe SSD 220S 512GB - NVMe PCIe Gen3 x4 ( https://www.transcend-info.com/Support/No-991 ) no graphics card. black screen when connect monitor by HDMI all worked well by D-SUB connection - enter bios, install windows, boot from M2. but with HMDI - black screen only - no video. remove TS512GMTE220S - exist video by HDMI (enter to bios only of course without disk). insert back TS512GMTE220S - again black screen by HDMI and work normal (look like until) by D-SUB. are this can be solved ? formally only H370M Pro4 is support this NVMe are if use graphic card - here will be ok with hdmi ? or may be graphic card will be conflict with NVMe TS512GMTE220S disk too ?