Z170 Extreme4+ severe issues

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi everyone. I built a PC with the Z170 Extreme4+, but I am having issues with it randomly shutting down whenever I use it. For example, I am (sometimes) able to boot into the BIOS, and use it for a couple of seconds, to a couple of minutes, but it eventually randomly shuts down. I originally didn't have this issue, but I installed Windows 7, had issues with a MEMORY_MANAGEMENT BSOD, and I finally started getting this issue.
I also later tried to flash a newer version of the BIOS, which was a poor decision by me, and the system shut down part way through.

Now, whenever I boot the computer, I get a Dr. Debug code 19.

Specs of computer:

CPU: i7-6700k
Motherboard: ASRock Z170 Extreme4+
RAM: HyperX FURY DDR4-2133 16 GB (2x8GB)
PSU: Corsair CX600M
GPU: MSI GTX 980Ti Gaming 6G
Storage: Samsung 850 EVO 250GB SSD, WD Red 3TB
Cooler: Corsair H100i GTX

Edit:
I have tried replacing the RAM, and I still get code 19.

Edited by env_explosion - 08 Nov 2015 at 11:24am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
env_explosion Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 08 Nov 2015 Status: Offline Points: 4	Post Options Post Reply Quote env_explosion Report Post Thanks(0) Quote Reply Topic: Z170 Extreme4+ severe issues Posted: 08 Nov 2015 at 11:19am
	Hi everyone. I built a PC with the Z170 Extreme4+, but I am having issues with it randomly shutting down whenever I use it. For example, I am (sometimes) able to boot into the BIOS, and use it for a couple of seconds, to a couple of minutes, but it eventually randomly shuts down. I originally didn't have this issue, but I installed Windows 7, had issues with a MEMORY_MANAGEMENT BSOD, and I finally started getting this issue. I also later tried to flash a newer version of the BIOS, which was a poor decision by me, and the system shut down part way through. Now, whenever I boot the computer, I get a Dr. Debug code 19. Specs of computer: CPU: i7-6700k Motherboard: ASRock Z170 Extreme4+ RAM: HyperX FURY DDR4-2133 16 GB (2x8GB) PSU: Corsair CX600M GPU: MSI GTX 980Ti Gaming 6G Storage: Samsung 850 EVO 250GB SSD, WD Red 3TB Cooler: Corsair H100i GTX Edit: I have tried replacing the RAM, and I still get code 19. Edited by env_explosion - 08 Nov 2015 at 11:24am

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22748	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 08 Nov 2015 at 4:05pm
	I take it you switched to BIOS 2 after the failed update?

env_explosion Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 08 Nov 2015 Status: Offline Points: 4	Post Options Post Reply Quote env_explosion Report Post Thanks(0) Quote Reply Posted: 08 Nov 2015 at 4:40pm
	Thanks for the reply Xaltar. I in did in fact figure this out before you replied. After switching, I was then able to copy the BIOS back, and update to the latest version.

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22748	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 08 Nov 2015 at 5:46pm
	Great to hear, I hope everything is working as it should now.