|
Fatal1ty B450m Gaming k4 Compatibility |
Post Reply 
|
Page 12> |
| Author | |
joop1981 
Newbie 
Joined: 08 Oct 2017 Location: earth Status: Offline Points: 29 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Fatal1ty B450m Gaming k4 CompatibilityPosted: 20 Aug 2019 at 5:36am |
|
Please keep us informed.
|
|
 |
|
|
Noan91
Newbie
Joined: 15 Aug 2019 Status: Offline Points: 12 |
Post Options
Thanks(0)
Quote Reply
Posted: 20 Aug 2019 at 4:23am |
|
On closer inspection it appears the pins on the cpu were bent.I'll be getting a replacement and seeing if that was the problem. Thank you for your assistance.
|
|
|
|
|
Noan91
Newbie
Joined: 15 Aug 2019 Status: Offline Points: 12 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2019 at 11:38pm |
|
Sorry colored cords are on the left side
|
|
|
|
|
Noan91
Newbie
Joined: 15 Aug 2019 Status: Offline Points: 12 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2019 at 11:34pm |
|
Both the 8 pin cpu cord and 24 pin motherboard cord are plugged in. PSU is confirmed good on another motherboard though that only had a 4 pin cpu slot.
Case cords and board speaker are plugged in according to the directions on the board and in the manual with the colored wires on the right side. |
|
|
|
|
joop1981
Newbie
Joined: 08 Oct 2017 Location: earth Status: Offline Points: 29 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2019 at 5:54pm |
|
Did you connect the 8 pin cpu power supply to the board, beside the 24 pin main mb power supply cable?
|
|
|
|
|
Noan91
Newbie
Joined: 15 Aug 2019 Status: Offline Points: 12 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2019 at 11:51am |
|
Down to just one ram stick, cpu and a 750 psu. No response from the board other than the led slowly pulsing while the psu is engaged. No fans, beeps or VGA output.
|
|
|
|
|
joop1981
Newbie
Joined: 08 Oct 2017 Location: earth Status: Offline Points: 29 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2019 at 5:41am |
|
Another (old) known issue:
The Fan Control doesn't work unless you set fan monitoring to tctl |
|
|
|
|
joop1981
Newbie
Joined: 08 Oct 2017 Location: earth Status: Offline Points: 29 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2019 at 5:30am |
|
If you use a DDR4 two module kit, remove temporarily the second module in slot B2 in order to start your system and flash the BIOS to the latest version.
The power supply should be at least 700W Remove all items not required for the fist startup. |
|
|
|
|
Noan91
Newbie
Joined: 15 Aug 2019 Status: Offline Points: 12 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2019 at 1:54am |
|
Thank you! Unfortunately while this answers my question I'm still left with a problem of the board not posting. At least I can rule out the cpu as the likely problem.
|
|
|
|
|
joop1981
Newbie
Joined: 08 Oct 2017 Location: earth Status: Offline Points: 29 |
Post Options
Thanks(0)
Quote Reply
Posted: 17 Aug 2019 at 4:24pm |
|
There is no difference compared with a different cooler from the market. Both boxed or tray Ryzen 7 2700X processors should work fine.
The cooler is connected to the motherboard for power supply with a standard 4 pins plug. The only thing with the boxed version could possibly be that the RGB led function on top of the cooler housing is not yet supported. The leds will work but changing the colours with software may not be implemented yet. |
|
|
|
|
Post Reply
|
Page 12> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options