DeskMini 110 power connection phantom boot try

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello forum!

Given two DeskMini 110.
One is about 2y old, one is rather new.

When I plug-in the power supply of the new one, for maybe 3 seconds the blue power light goes on, CPU fan starts spinning and disk light makes a blip like disk is accessed and.... everything stops. I have to press the power button and it boots up, as expected. The "Unsafe Shutdowns" counter of the NVME SSD increases by one, so I really think it tries to start to boot but actually does not.
I checked the UEFI setting "boot after power loss" and it is disabled.

With the old DeskMini I don't have and never had this problem.

So something must have changed?
A newer board revision?
Newer UEFI revision?
Different UEFI default settings and I just have to fix one?

Note that I tried swapping the SSD, it doesn't change, so I don't think it's a software problem of properly shutting down.

Anyone seen this before?
Any suggestions what to try? - My only idea is to flash UEFI to newest version on the weekend when its not in use and hope for the best....

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
aforumuser Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 25 May 2017 Status: Offline Points: 175	Post Options Post Reply Quote aforumuser Report Post Thanks(0) Quote Reply Topic: DeskMini 110 power connection phantom boot try Posted: 22 Aug 2019 at 1:15am
	Hello forum! Given two DeskMini 110. One is about 2y old, one is rather new. When I plug-in the power supply of the new one, for maybe 3 seconds the blue power light goes on, CPU fan starts spinning and disk light makes a blip like disk is accessed and.... everything stops. I have to press the power button and it boots up, as expected. The "Unsafe Shutdowns" counter of the NVME SSD increases by one, so I really think it tries to start to boot but actually does not. I checked the UEFI setting "boot after power loss" and it is disabled. With the old DeskMini I don't have and never had this problem. So something must have changed? A newer board revision? Newer UEFI revision? Different UEFI default settings and I just have to fix one? Note that I tried swapping the SSD, it doesn't change, so I don't think it's a software problem of properly shutting down. Anyone seen this before? Any suggestions what to try? - My only idea is to flash UEFI to newest version on the weekend when its not in use and hope for the best....

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8727	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 22 Aug 2019 at 10:56am
	Dear Aforumuser, Thank you for posting your query to ASRock forum. We have checked, however, we are not able to see the same symptom on our side. Please try with suggestions below: 1. Please update the BIOS to newest version P8.10. 2. Please try installing only one RAM on the system. 3. Please try changing the RAM. 4. Please try to change the power adapter. 5. Please leave the minimum bootable hardware on the system. (Only leave the CPU, CPU fan and one RAM) If above mentioned did not work, kindly contact your motherboard distributor for further assistance. With thanks, ASRock TSD

aforumuser Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 25 May 2017 Status: Offline Points: 175	Post Options Post Reply Quote aforumuser Report Post Thanks(1) Quote Reply Posted: 30 Aug 2019 at 9:39pm
	As a followup for the archives: Old Deskmini 110 has UEFI v7.00 and never had any problem. The new DeskMini 110 was shipped with UEFI v7.70 and has the above described problem. After upgrading to newest UEFI v8.10 I can report it no longer shows the problem.