New X570 Steel Legend display not working

I am running a GPU. RTX2070 and had the same problem so I removed it thinking that could be part of the problem. I did not think that the CPU didn't have an integrated GPU. Its been a while since I build a system. Like 10 years.

I have a new X570 Steel Legend motherboard with a new 3700x with 16gb 3200 of new G.SKILL Ripjaw ram mounted in A2/B2. This setup is upgrading my current system so I am using my existing 600W power supply. My power supply has 2x4 ATX which I connected to the 8 pin on the mobo. The manual says to connect another 4 pin ATX but my power supply doesn't not have another one available. The old mobo had the same setup but I only used the 8 pin and it worked fine. Upon booting the POST lights blink as it is booting then go out. Everything seems to be working fine but I cannot get the display to work.

I am thinking it has to do with either the power supply not having that other 4 pin connector or maybe something with the RAM but the G.Skill is supposed to work with this motherboard. If that other 4pin ATX is required can I use something like a molex to atx adapter or should I get a new one?

Here is a link to the RAM
https://www.newegg.com/g-skill-16gb-288-pin-ddr4-sdram/p/N82E16820232181?Item=N82E16820232181

Here is a link to the RAM compatibility and it looks like I might have been mistaken as it is not listed as being compatible by the part number. Not sure if that is my problem or not. Any advice would be greatly appreciated.
https://www.asrock.com/MB/AMD/X570%20Steel%20Legend/index.asp#MemoryMS