downgrade bios version |
Post Reply | Page 12> |
Author | |
lazosv9
Newbie Joined: 15 Oct 2019 Location: greece Status: Offline Points: 9 |
Post Options
Thanks(0)
Posted: 16 Oct 2019 at 4:28am |
Yes the asrock send a tool like jz tool.i think to keep that frequency at 3133, I don't want to tease it anymore or to do more experiments with ram.i have see already difference on fps with this frequency and im ok.anyway thank you especially you Ray62 for the support and tips, i'll hear your opinion and i keep p1.80 version.thank you so much
|
|
Ray62
Groupie Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
Post Options
Thanks(0)
|
Congratulations! That was a fast support.
Did you get the Asrock help with the Windows flash tool? Keep that p1.80 bios with your 2600X. CMK16GX4M2B3200C16 with Samsung B-Die, there is potential for better clocks! But 3133Mhz is a good result by just using XMP and frequency! However, if you want more, you have to investigate more and the DRAM Calculator is the helping hand for that. |
|
Asrock Fatal1ty X370 Professional Gaming Offline
Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE |
|
lazosv9
Newbie Joined: 15 Oct 2019 Location: greece Status: Offline Points: 9 |
Post Options
Thanks(0)
|
ok so i made it,im on p1.80 bios version now with the help of asrock but the problem remains.but now the stable frequency is 3133mhz.thats good.bellow i quote the timings
MEMORY MODULE Manufacturer Corsair Series Vengeance LPX Part Number CMK16GX4M2B3200C16 Serial Number 00000000h JEDEC DIMM Label 8GB 1Rx8 PC4-2133P-UA0-10 Architecture DDR4 SDRAM UDIMM Speed Grade DDR4-2133P downbin Capacity 8 GB (8 components) Organization 1024M x64 (1 rank) Register Model N/A Manufacturing Date Undefined Manufacturing Location Taiwan Revision / Raw Card 0000h / A0 (8 layers) DRAM COMPONENTS Manufacturer Samsung Part Number K4A8G085WB-BCPB Package Standard Monolithic 78-ball FBGA Die Density / Count 8 Gb B-die (Boltzmann / 20 nm) / 1 die Composition 1024Mb x8 (64Mb x8 x 16 banks) Clock Frequency 1067 MHz (0,938 ns) Minimum Timing Delays 15-15-15-36-50 Read Latencies Supported 16T, 15T, 14T, 13T, 12T, 11T, 10T... Supply Voltage 1,20 V XMP Certified 1600 MHz / 16-18-18-36-54 / 1,35 V XMP Extreme Not programmed SPD Revision 1.0 / January 2014 XMP Revision 2.0 / December 2013 FREQUENCY CAS RCD RP RAS RC FAW RRDS RRDL CCDL 1067 MHz 16 15 15 36 50 23 4 6 6 1067 MHz 15 15 15 36 50 23 4 6 6 933 MHz 14 13 14 31 44 20 4 5 5 933 MHz 13 13 14 31 44 20 4 5 5 800 MHz 12 11 12 27 38 17 3 5 5 800 MHz 11 11 12 27 38 17 3 5 5 667 MHz 10 9 10 22 31 14 3 4 4 667 MHz 9 9 10 22 31 14 3 4 4 FREQUENCY CAS RCD RP RAS RC FAW RRDS RRDL 1600 MHz 16 18 18 36 54 36 6 9 Version: 16.0.1.0 Build 1014 |
|
lazosv9
Newbie Joined: 15 Oct 2019 Location: greece Status: Offline Points: 9 |
Post Options
Thanks(0)
|
Now im using 2933mhz stable.ok ill post it later the data but i think the problem is on the bios version.i really miss to upgrade first to 1.80 version and then to 3.50
|
|
Ray62
Groupie Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
Post Options
Thanks(0)
|
You also can lower the DRAM frequency. Just try it one frequency step lower.
Keep the SOC voltage on default, just increase the DRAM voltage a bit. If the DRAM calculator is too difficult, you anyway should use the Thaiphoon burner to read out the config data of your ram and post it here. |
|
Asrock Fatal1ty X370 Professional Gaming Offline
Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE |
|
lazosv9
Newbie Joined: 15 Oct 2019 Location: greece Status: Offline Points: 9 |
Post Options
Thanks(0)
|
Ray62 ohh sorry.i have ryzen 5 2600x and corsair vengeance lpx 16gb 3200mhz.i have already try to increase voltages(soc voltage and dram voltage)but is still the same.the dram calculator is not for me.too difficult
|
|
Ray62
Groupie Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
Post Options
Thanks(0)
|
As i already posted: The video just shows the procedure which you have to understand! It's the same for all boards. I already posted the link to one flash tool. I don't know a link for your specific board and bios. The tool itself is always the same for each board, but you have to modify the ini file and the ROM image according to your board and bios version. Anyway, if this is to complicated for you, don't do it this way. Ask the Asrock support for a downgrade tool for your board. |
|
Asrock Fatal1ty X370 Professional Gaming Offline
Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE |
|
Ray62
Groupie Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
Post Options
Thanks(0)
|
So again, what CPU and RAM are you using?
Setting the memory clock by just using the XMP profile isn't working properly in the most cases. And it depends on which CPU generation and which RAM you are using. Easy try: Increasing the DRAM voltage with 3200MHz from 1.35V to 1.36..1.38V may help to get stability (for example, for the RAM in my signature i must use 1.37V). More complex try: Use the Ryzen DRAM Calculator and it's documentation and howto's and get more knowledge for DRAM configuration. |
|
Asrock Fatal1ty X370 Professional Gaming Offline
Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE |
|
lazosv9
Newbie Joined: 15 Oct 2019 Location: greece Status: Offline Points: 9 |
Post Options
Thanks(0)
|
Ray62 i think the file in description on video dont have for b450 boards.where i can find this flash tool?
|
|
lazosv9
Newbie Joined: 15 Oct 2019 Location: greece Status: Offline Points: 9 |
Post Options
Thanks(0)
|
I think the board it had the p1.30 or p1.50 at the very first.i have issues when i set my memory to 3200mhz.its working but after some time i have bsod
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |