G41C-GS R2.0 ram at 1333

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi, 
I'm new here. Here's my system: https://valid.x86.fr/4fc991 
RAM is brand new, dated this year week 40 and 23.
The RAM sticks are both dual sided, 8 chips at front and at back.
I moved the jumper near the pcie that allows me to use 1333Mhz ram.
If I insert just one stick any ddr3 slot, I can boot up and I can go to BIOS and select 1333 MHz and then I can reboot ok. No issues.
But if I put the second RAM stick, the system won't boot up, just fan spin.
If I reset the CMOS, the syetem will boot up. The speed will be 500MHz ddr3 1000. However if I select DDR3 1333, it won't boot.
I tried some settings but no matter what, the 2 RAM sticks won't run at 1333 Mhz but it will work at 1000 MHz.
If I move the jumper to default position, DDR3 ram will work at 800MHz.
I also bought some other single sided 1333Mhz RAM sticks from kingston and crucial and system will not boot up, no matter what settings. 
Another thing I noticed is that BIOS says that RAM voltage is 1.60v, it's supposed to be 1.50v.
How can I have both RAM stick to work at 1333MHz?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
moonlightzz Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Oct 2019 Location: Portugal Status: Offline Points: 3	Post Options Post Reply Quote moonlightzz Report Post Thanks(0) Quote Reply Topic: G41C-GS R2.0 ram at 1333 Posted: 29 Oct 2019 at 3:35am
	Hi, I'm new here. Here's my system: https://valid.x86.fr/4fc991 RAM is brand new, dated this year week 40 and 23. The RAM sticks are both dual sided, 8 chips at front and at back. I moved the jumper near the pcie that allows me to use 1333Mhz ram. If I insert just one stick any ddr3 slot, I can boot up and I can go to BIOS and select 1333 MHz and then I can reboot ok. No issues. But if I put the second RAM stick, the system won't boot up, just fan spin. If I reset the CMOS, the syetem will boot up. The speed will be 500MHz ddr3 1000. However if I select DDR3 1333, it won't boot. I tried some settings but no matter what, the 2 RAM sticks won't run at 1333 Mhz but it will work at 1000 MHz. If I move the jumper to default position, DDR3 ram will work at 800MHz. I also bought some other single sided 1333Mhz RAM sticks from kingston and crucial and system will not boot up, no matter what settings. Another thing I noticed is that BIOS says that RAM voltage is 1.60v, it's supposed to be 1.50v. How can I have both RAM stick to work at 1333MHz?