FM2A88X +EXTREME 4 |
Post Reply |
Author | |
kelvinluc
Newbie Joined: 20 Nov 2015 Location: United Kingdom Status: Offline Points: 6 |
Post Options
Thanks(0)
Posted: 20 Nov 2015 at 7:39pm |
Hi Guys, been at this for time. New machine for a friend for Christmas.
AMD FM2 7870 with 4CPU 8GPU cores R9 380 xfx ddr5 graphics card 16gb 1833 fury DDR3 ram All default values as Mobo came out of box. Upgraded Bios to latest as note in box suggested. Having issues on windows 7 with the following: 1. USB not recognised message constantly coming up after loading both the ASrock drivers and the xfx and the latest catalyst drives from xfx and AMD websites. Get unknown device in device manager. 2. I know the R7 onboard graphics is slower than the R9 I have bought (I had a finite amount of money to spend so bought the fastest I could with what I had). But have I wrongly assumed that crossfire would work without any cabling, I would assume again that this would be handled through the PCIE interface as the R7 (or whichever is plugged into monitor shows as no resources available) shows as not working working i.e. exclamation mark, and that the onboard R7 would work with my R9 albeit a little slower on the memory side. DDR5 to DDR3 1833 same as shared memory and do I have to have the same 2GB allocated on board as the add in card? Any help appreciated. Kind regards Edited by kelvinluc - 20 Nov 2015 at 7:40pm |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24653 |
Post Options
Thanks(0)
|
You can't use an R9 380 in dual graphics mode with an APU, the highest GPU you can use for dual graphics is an R7 250. Crossfire is the use of 2 identical GPUs where dual graphics is pairing the iGPU from the APU with a discrete GPU of similar specification. The R9 380 will be infinitely faster than dual graphics with an R7 250 though so you have nothing to worry about.
Check the hardware ID of the unknown device and search it in google to be sure it is USB.
Edited by Xaltar - 20 Nov 2015 at 8:20pm |
|
kelvinluc
Newbie Joined: 20 Nov 2015 Location: United Kingdom Status: Offline Points: 6 |
Post Options
Thanks(0)
|
R9 with R7, Thanks for confirming. I'll disable in the BIOS and gain back that extra memory.
As far as the USB is concerned. just got a garbled stop message which I first thought was another language, this is after ive done windows updates. Might try windows 10 ;(. |
|
kelvinluc
Newbie Joined: 20 Nov 2015 Location: United Kingdom Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Hi Xaltar,
I looked at the device id and managed to get properties of it in device manager. It keeps going off and back on. Error pops up USB DEVICE NOT RECOGNIZED Properties show device type: Universal serial bus controller Manufacturer: (standard usb host) location: port_#0002, hub #0003 Windows has stopped this device because it has reported problems (code43) Will google as you suggest but would think this is driver related or possible hardware problem. regards Kelv
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24653 |
Post Options
Thanks(0)
|
Here are some troubleshooting tips to help determine if it is a hardware of driver fault. More often than not it is simply a corrupt or incompatible driver.
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Either post your Hardware ID here or search for it using your fav search engine.
How to discover the Hardware ID: Right click on the offending device choose Properties click the Details tab under Property click to open the drop-down and select Hardware Ids right click anywhere in the Value box and choose Select All right click and select Copy You now have the offending devices ids to paste into a text file and save it. Either paste them here for us to help you with or use them to search yourself. The Hardware Ids will tell us what the specific device is. Note, some times there's a Manufacturer listed in the pull down. |
|
kelvinluc
Newbie Joined: 20 Nov 2015 Location: United Kingdom Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Hi Guys,
Done all the above. still getting the error. Ebuyer have said to send back and let them test. Thanks anyway guys Kelv
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
And ....... ? |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |